User instructions

TABLE FOR CERTIFICATION BODIES

 

 

 

 

 

Reference standard

EN 50242

 

 

 

Reference program

 

Selector on 3 + ECO 55°C button

 

 

 

Load

 

12 place-settings

 

 

 

Type of detergent

 

B

 

 

 

Amount of detergent

 

30 g

 

 

 

Rinse aid setting

 

Depending on the model 3/4 or 4/6

EN 50242

3.2Washing programs

Before starting a washing program make sure that:

The water supply tap is open.

The correct amount of detergent has been added to the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without obstruction.

The dishwasher door is securely closed.

HALF LOAD WASH SETTING

This function is especially suitable for loads up to 6 place settings and allows saving of water and electricity. It is controlled by the HALF LOAD button (4) (see section "3. Description of the controls") and allows washing in the upper basket only.

IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.

A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.

CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.

CANCELLING THE CURRENT PROGRAM

To cancel the program in progress the dishwasher must be switched off by pressing the ON/OFF key (3) (see section "3. Description of the controls").

Turn the program selector to SOAK and wait for the dishwasher to start. On completion of the program, switch off the dishwasher by pressing the ON/OFF key (3).

32

Page 10
Image 10
Smeg LVF32G Washing programs, Table for Certification Bodies, Half Load Wash Setting, Cancelling the Current Program