Setting LAN port for PC network

1.Press the [MENU] key, choose INITIAL SETTING, enter password, choose SET I/O PORT and press the [ENT] key to show the SET I/O PORT sub menu.

2.Press ▲ or ▼ to choose SET LAN PORT and press the [ENT] key.

[SET LAN PORT] MODE : STANDARD IP ADDRESS

172.031. 024. 001 SUB NET MASK

255.255. 000. 000 PORT NO. : 10000

QUIT [MENU]

3.Press the [ENT] key to show the mode selecting window.

4.Press ▲ or ▼ to choose suitable mode and press the [ENT] key. STANDARD: When connecting a LAN device

MONITOR: When connecting a monitor

SERVICE: Data output for service man

DISABLE: No connection

5.Press the [ENT] key, enter IP address in the IP ADDRESS field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)

Choose digit with ◄ or ►; set value with ▲ or ▼.

6.Press the [ENT] key, enter sub net mask in the SUB NET MASK field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)

7.Press the [ENT] key, enter port number in the PORT NO. field and press the [ENT] key. (Setting range: 0 to 65535)

8.Press the [MENU] key several times to save the settings and close the menu.

Setting LAN port for NAVNET 3D network

1.Press the [MENU] key, choose INITIAL SETTING, enter password, choose SET I/O PORT and press the [ENT] key to show the SET I/O PORT sub menu.

2.Press ▲ or ▼ to choose SET LAN PORT and press the [ENT] key.

[SET LAN PORT]

1/2

IP ADDRESS

 

172.031. 024. 001

SUB NET MASK

255.255. 000. 000

NAVNET PORT NO. 10000

3.Press the [ENT] key, enter IP address in the IP ADDRESS field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255) Choose digit with ◄ or ►; set value with ▲ or ▼.

28

Page 34
Image 34
Furuno FA-150 installation manual Setting LAN port for PC network, Setting LAN port for Navnet 3D network