Furuno FA-150 installation manual Setting GPS Antenna Position

3.3 Setting GPS Antenna Position

1.Open the INITIAL SETTINGS window, referring to step 1-3 in "Setting blue status" on page 18 - 19.

2.Press ▲ or ▼ key to choose SET INT ANT POS. and press the [ENT] key.

[SET INT ANT POS.]

A: 0 m

B: 0 m

AC: 0 m

BD: 0 m

C D

QUIT[MENU]

SET INT ANT POS. sub-menu (Data entry)

3.Press the [ENT] key again.

4.Use the cursor pad to enter the distance for “A” of the FA-150 GPS antenna then press the [ENT] key.

A:Distance from bow to GPS antenna position, setting range: 0-511 m

5.Press the [ENT] key and enter distance for B, C and D, similar to how you did for "A" above.

B:Distance from stern to GPS antenna position, setting range: 0-511 m

C:Distance from port to GPS antenna position, setting range: 0-63 m

D:Distance from starboard to GPS antenna position, the setting range: 0-63 m

6.Press the [MENU] key to return to the INITIAL SETTINGS menu.

7.Press ▲ or ▼ key to choose SET EXT ANT POS and press the [ENT] key.

8.Enter distance for location of an external GPS antenna (if connected) similar to how you did for the internal GPS antenna.

9.Finally press the [MENU] key to save the settings.

Notes

•Use "Length Over All" (not "Length Between Perpendicular") to express the dimensions for A and B.

•The sum of A+B (Length Over All) must be the same for both INT ANT POS. and

EXT ANT POS.

•The sum of C+D (Width) must be the same for both INT ANT POS. and EXT ANT POS.

21