SAFETY INSTRUCTIONS
The installer must read the safety instructions before attempting to install this equipment.
| WARNING | could result in death or serious injury. |
|
|
|
| Indicates a potentially hazardous situation which, if not avoided, |
| |
|
|
|
| |
| CAUTION | Indicates a potentially hazardous situation which, if not avoided, |
| |
| can result in minor or moderate injury. |
|
| |
|
|
|
|
|
| Warning, Caution | Prohibitive Action | Mandatory Action |
|
|
|
|
|
|
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment unless totally familiar with electrical circuits and service manual.
Only qualified personnel should work inside the equipment.
Turn off the power at the switch- board before beginning the installation.
Fire or electrical shock can result if the power is left on.
Do not install the equipment where it may get wet from rain or water splash.
Water in the equipment can result in fire, electrical shock or damage the equipment.
Be sure that the power supply is compatible with the voltage rating of the equipment.
Connection of an incorrect power supply can cause fire or damage the equipment. The voltage rating of the equipment appears on the label above the power connector.
CAUTION
Observe the following compass safe distances to prevent interference to a magnetic compass:
| Standard | Steering | |
| compass | compass | |
|
|
| |
1.2 m | 0.8 m | ||
UAIS Transponder | |||
|
| ||
|
|
| |
0.45 m | 0.3 m | ||
Monitor unit | |||
|
| ||
|
|
| |
0.3 m | 0.3 m | ||
|
|
| |
0.3 m | 0.3 m | ||
|
|
| |
0.9m | 0.6 m | ||
|
|
|
Attach securely protective earth to the ship's body.
The protective earth is required to the power supply to prevent electrical shock.
i
