Attaching LAN KIT Option | Furuno FA-150 specs

4. ATTACHING LAN KIT (OPTION)

To connect to PC network or NAVNET 3D network, the optional LAN kit is required.

Name: LAN kit

Type: OP24-8

Code no.: 005-956-020

	Name	Code no.	Qty
1	NET100 board	008-535-840	1
2	Hex. spacer	000-801-678	4

Remark 03P9332

Attaching

1.Dismount the bottom cover.

2.Attach NET100 board 03P9332 to the 24P0035 board, referring to the figure shown below.

J9

Unfasten 4 screw	24P0035
	SW3

Transponder (Bottom cover removed)

Use screws removed in left figure.

NET Board03

03P9332

Spacer

J9

24P0035

Attaching 03P9332

3.Set DIP switch SW3 #4 as follows.

•For NAVNET 3D network: SW3 #4 OFF (default)

•For PC network: SW3 #4 ON

27

Image 33

Furuno FA-150 installation manual Attaching LAN KIT Option

Contents

Uais Transponder 00015008314 Safety Instructions Category of the units System Configuration Equipment Lists Standard supplyIii Optional supply Antenna Units MountingGPS antenna unit Extending antenna cable How to attach connector N-P-8DFB How to attach the connector N-P-8DFB for cable 8D-FB-CV Cabling VHF antenna Location Horizontal separation distance How to attach the plug M-P-7 Installation overview of GPS/VHF combined antenna3 GPS/VHF combined antenna GPS/VHF Combined antenna Mounting procedure Installing distributor unit DB-1 Monitor Unit Desktop mountingFlush mounting Name Type Code No Qty Type Mounting Uais Transponder Pilot Plug option Power Supply option Connection Wiring Internal ports of the Transponder Fabrication of cables TTYCS-4, TTYCS-1Q and TTYCS-1 Cable connection at transponder Fabrication of power cable DPYC-2.5 How to attach wires to the Wago connector 100-115 VAC Changing Ship’s Mains Specifications Setting and Adjustment Inland AIS Specific SettingsEntering activation key Setting blue sign status Selecting AIS modePassword entry window NAV Status menu initial sub-menu SET Blue Sign SW sub-menu Initial Settings menu SET Mmsi sub-menu Setting MMSI, IMO No., Name and Call Sign Setting GPS Antenna Position Setting I/O Port Setting Ship TypeSetting COM port/PC port Table Ship type Press the ENT key again to display the Mode setting window COM1 Long Range Priority menu Priority setup Quality setup Inland AIS only Attaching Attaching LAN KIT Option Setting LAN port for Navnet 3D network Setting LAN port for PC network Continuous This page intentionally left blank Transponder IEC 61162-1/2 Data Sentences Output data/Sentences Input data/SentencesInland AIS specific sentences Input +056#..#6+10/#64+#.5 # 8# #%%5514+5 Antenna Cable Set CP20-02700 CP20-02710 Antenna Cable Set CP20-00300 CP20-00310 Page Page Page Hatai Mar,2707 R.Esumi May 20 Page Jan 26/Oct/09 R.Esumi Page Page Page Page Page Transponder Unit