SATA Controller Configuration
Parameter | Description | Option |
|
|
|
Onboard SATA Controll | When enabled, the SATA controller will | Enabled |
| function normally. | Disabled |
|
|
|
OnChip SATA Type | Select the on chip SATA type. | IDE |
|
| RAID |
| IDE: When set to IDE, the SATA controller | ACHI |
| disables its RAID and AHCI functions and |
|
| runs in the IDE emulation mode. This is not |
|
| allowed to access RAID setup utility. |
|
| RAID: When set to RAID, the SATA controller |
|
| enables both its RAID and AHCI functions. |
|
| You will be allows access the RAID setup |
|
| utility at boot time. |
|
| ACHI: When set to AHCI, the SATA controller |
|
| enables its AHCI functionality. Then the RAID |
|
| function is disabled and cannot be access |
|
| the RAID setup utility at boot time. |
|
SATA Port 0/1/2/3/4/5 | Displays the installed HDD devices. |
|
|
|
|
41
