3.2 Setting MMSI, IMO No., Name and Call Sign

1.Display the INITIAL SETTINGS menu referring to step 1-3 in "Setting blue sign status" on page 18 - 19.

[INITIAL SETTINGS] SET MMSI

SET INT ANT POS.

SET EXT ANT POS. SET SHIP TYPE SET I/O PORT

SET BLUE SIGN SW Appears for Inland AIS only QUIT [MENU]

INITIAL SETTINGS menu

2. SET MMSI is selected; press the [ENT] key to display the SET MMSI window.

[SET MMSI] MMSI: 000000000

IMO NO.: 000000000 NAME:

CALL SIGN:

QUIT [MENU]

SET MMSI (Class A)

[SET MMSI] MMSI: 000000000

NAME:

CALL SIGN:

IMO NO.: 000000000

ENI: 00000000

QUIT [MENU]

SET MMSI (Inland AIS)

SET MMSI sub-menu

3.MMSI is selected; press the [ENT] key. Use the cursor pad to set MMSI no., in nine digits, as follows:

a)The cursor is selecting the 1st digit place of the MMSI no. Press ▲ or ▼ to select the 1st digit of the number. Pressing ▲ displays alphanumeric characters cyclically in order of blank space, alphabet, numerals and symbols.

b)Press ► to shift the cursor to the adjacent place, then use ▲ or ▼ to select the 2nd digit.

c)Repeat steps a) and b) to finish entering the number. To erase a character, insert a space.

d)After entering all digits, press the [ENT] key to register input.

4.Enter IMO number, name of your vessel and call sign, similar to how you entered MMSI. For the Inland AIS, additionally enter ENI no.

IMO: Nine digits. If the IMO number has 7 digits, enter “0” twice followed by IMO number. If the ship has no IMO number, enter nine zeroes.

ENI: Eight digits

5.After entering data, press the [MENU] key to close the menu.

Note: If you enter incorrect data, do the procedure from step 1.

20

Page 26
Image 26
Furuno FA-150 installation manual Setting MMSI, IMO No., Name and Call Sign, SET Mmsi sub-menu