Furuno FA-150 installation manual Cable connection at transponder

*: Waterproofing connectors

Wrap connector with vulcanizing tape and then vinyl tape. Bind the tape end with a cable-tie.

Waterproofing connector

**: DPYC-2.5, TTYCS-1Q and TTYCS-4 are Japan Industry Standard cables. Use them or the equivalents, referring to the Appendix.

Cable connection at transponder

Fabrication of cables TTYCS-4, TTYCS-1Q and TTYCS-1

L

50

Shield	Remove paint
	by 50 mm.
	Cut vinyl sheath.

L:Depends on equipment connected. Measure at the transponder.

Expose core and fold back shield onto cable.

Vinyl tape

45

6

Lay in clamp where paint was removed.

14