Integra DTR-6.8 Audio Adjust Functions, Tone Control Settings, Multiplex/Mono Settings

DTR-6.8_En.book Page 96 Wednesday, June 20, 2007 4:16 PM

Advanced Setup—Continued

Audio Adjust Functions

Here you can set listening mode-related settings and functions.

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Audio
	Adjust,” and then press [Enter].
	The Audio Adjust menu appears.
	3.	Audio Adjust
	1.	Tone Control
	2.	Multiplex/Mono

3.PL II x/Neo:6

4.Dolby EX

5.Theater-Dimensional

6.LFE Level

3 Use the Up and Down []/[ ] buttons to select the functions, and then press [Enter].

The function menu you selected appears.

4	Use the Up and Down [ ]/[	]
	buttons to select the settings,
	and use the Left and Right [	]/
	[ ] buttons to set them.
	The settings are explained below.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

The Audio Adjust functions are explained below.

Tone Control Settings

You can adjust the bass and treble for the front speakers, except when the Direct or THX listening mode is selected.

■Bass

You can boost or cut low-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

■Treble

You can boost or cut high-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

Multiplex/Mono Settings

■Multiplex Input Ch

This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are output.

■Mono Input Ch

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

L+R: Both the left and right channels are output (default).

L:Only the left channel is output.

R:Only the right channel is output.

■Output Speaker

This setting determines which speakers output mono audio when the Mono listening mode is selected.

L/R: Mono audio is output by the front left and right

speakers.

C:Mono audio is output by the center speaker

(default).

96