Integra DTR-6.8 instruction manual Assigning Listening Modes to Input, Sources

DTR-6.8_En.book Page 98 Wednesday, June 20, 2007 4:16 PM

Advanced Setup—Continued

Assigning Listening Modes to Input						4	Use the Up and Down [ ]/[	]
Sources							buttons to select the signal for-
You can assign a default listening mode to each input							mat that you want to set, and
							then use the Left and Right [	]/
source that will be selected automatically when you
							[ ] buttons to select a listening
select each input source. For example, you can set the
							mode.
default listening mode to be used with Dolby Digital
							Only listening modes that can be used
input signals. You can select other listening modes dur-
							with each input signal format can be
ing playback, but the mode specified here will be
							selected.
resumed once the AV receiver has been set to Standby.
							The Last Valid option means that the
1
	Press the [Receiver] button fol-						listening mode selected last will be
	lowed by the [Setup] button.						used.
	The main menu appears onscreen.						Analog/PCM: With this setting, you
							can specify the listening mode to be
							used when an analog (CD, TV, LD,
							VHS, MD, turntable, radio, cassette,
							cable, satellite, etc.) or PCM digital
							(CD, DVD, etc.) audio signal is played.
							Dolby Digital: With this setting, you
2	Use the Up and Down [			]/[	]		can specify the listening mode to be
							used when a Dolby Digital format digi-
	buttons to select “5. Listening						tal audio signal is played (DVD, etc.).
	Mode Preset,” and then press						DTS: With this setting, you can specify
	[Enter].						the listening mode to be used when a
	The Listening Mode Preset menu						DTS format digital audio signal is
	appears.						played (DVD, LD, CD, etc.).
	5.	Listening Mode Preset					D.F. 2ch: With this setting, you can
	1.	DVD					specify the listening mode to be used
	2.	VCR/DVR					when a 2-channel (2/0) digital audio
	3.	CBL/SAT
	4.	GAME/TV					signal (Dolby Digital, DTS) is played
	5.	AUX
	6.	TAPE					(DVD, etc.).
	7.	TUNER
	8.	CD					D.F. Mono: With this setting, you can
	9.	PHONO
							specify the listening mode to be used
							when a mono digital audio signal is
3	Use the Up and Down [			]/[	]		played (DVD, etc.).
							Multich PCM: Specifies the default
	buttons to select the input
							listening mode for multichannel PCM
	source that you want to set, and
							sources input via a HDMI IN, such as
	then press [Enter].
							DVD-Audio.
	The signal format selection menu
							192k/176.4k: Specifies the default lis-
	appears.
							tening mode for high resolution
	5–1. Listening Mode Preset		– DVD	–
							176.4 kHz and 192 kHz digital audio
	Analog/PCM		Last Valid
							sources such as DVD-Audio.
	Dolby Digital		Last Valid				Dolby TrueHD: Specifies the default
	DTS		Last Valid				listening mode for Dolby TrueHD
	D.F. 2ch		Last Valid				sources, such as Blu-ray or HD DVD
	D.F. Mono		Last Valid				(input via HDMI).
							DTS-HD Master Audio: Specifies the
	For input selectors that have no digital						default listening mode for DTS-HD
							Master Audio sources, such as Blu-ray
	input jacks, only “Analog” will be
							or HD DVD (input via HDMI).
	available.
							DSD: Specifies the default listening
							mode for DSD multichannel sources,
							such as SACD.

98