Integra DTR-6.8 SIRIUS Satellite Radio Messages, Acquiring, Antenna Error, Sub Updated, Notes

DTR-6.8_En.book Page 75 Wednesday, June 20, 2007 11:54 PM

Listening to the Radio—Continued

3	Use the Up and Down [ ]/[ ]
	buttons to select “4. Satellite
	Radio,” and then press [Enter].
	The Satellite Radio menu appears.
	4-4. Satellite Radio
	SIRIUS Antenna Aiming
	Satellite	Terrestrial
	SIRIUS ID	- - - - - - - - - - - -

Adjust the position of the Sirius- Connect Home antenna so that the SAT/TER signal strength bar is as long as possible.

Terrestrial (TER) signals are only avail- able in certain areas.

So long as the signal strength is good, you can enjoy SIRIUS Satellite Radio by using either satellite or terrestrial reception.

Notes:

•The SIRIUS information on the Satellite Radio screen is only displayed when the Satellite Radio mode is set to SIRIUS or XM/SIRIUS (see page 68).

•If you’re using both XM Satellite Radio and SIRIUS Satellite Radio and the Satellite mode is set to XM/ SIRIUS (see page 68), signal strength meters for both systems appear on the same screen.

SIRIUS Satellite Radio Messages

The following messages may appear while using SIR- IUS Satellite Radio.

❑ACQUIRING

The SiriusConnect receiver is acquiring the signal or no signal is present. Make sure the SiriusConnect Home tuner is connected properly and that there are no obstacles close by.

❑ANTENNA ERROR

Make sure the SiriusConnect Home tuner is con- nected properly.

❑SUB UPDATED

Displayed while your subscription is being updated. No operations can be performed until this message has cleared.

❑UPDATING XXX%

Displayed while the channel map is being updated. Wait until the updating is complete.

❑UPDATING

Displayed while the SiriusConnect receiver’s firm- ware is being updated.

❑INVALID CHANNEL

Displayed if you select an unavailable channel.

❑CALL SIRIUS

Displayed when you select a channel to which you are not subscribed. Call SIRIUS if you want to sub- scribe.

❑CHECK SR TUNER

Displayed if the SiriusConnect receiver is not con- nected. Make sure the SiriusConnect receiver is con- nected properly, and make sure its AC adapter is plugged in.

75