Integra DTR-6.8 instruction manual Connecting a VCR or DVD Recorder for Recording, Notes

DTR-6.8_En.book Page 31 Wednesday, June 20, 2007 4:16 PM

Connecting the AV Receiver—Continued

Connecting a VCR or DVD Recorder for Recording

Step 1: Video Connection

Choose a video connection that matches your VCR or DVD recorder ( A or B ), and then make the connection. The

video source to be recorded must be connected to the AV receiver via the same type of connection.

Step 2: Audio Connection

Make the connection a .

Connection		AV receiver	Signal flow	VCR or DVD recorder	Picture quality
	A	VCR/DVR OUT S	⇒	S-Video input	Better
		VCR/DVR OUT V	⇒	Composite video input	Standard
	B
	a	VCR/DVR OUT L/R	⇒	Audio L/R input

B

A

a

L R

AUDIO	S VIDEO	VIDEO
IN	IN	IN

VCR,

DVD recorder

Notes:

•The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

•If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals supplied with your TV and VCR for details.

•Video signals connected to composite video inputs can only be recorded via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output. Similarly, video signals connected to S-Video inputs can only be recorded via S-Video outputs. If your TV/VCR is connected to an S-Video input, the recording VCR must be connected to an S-Video output.

•Video and audio signals that are input via the VCR/DVR IN will not be output by VCR/DVR OUT. When recording, select an input source other than VCR/DVR.

31