Integra DTR-6.8 Connecting Zone, Using Another Amp in Zone, Using Only Speakers in Zone

DTR-6.8_En.book Page 109 Wednesday, June 20, 2007 4:16 PM

Zone 2

Connecting Zone 2

With the Zone 2 function, you can enjoy one input source in the main room and a different source in another room.

1)Use another amp (receiver, integrated amp, or power amp) in Zone 2 and connect your Zone 2 speakers to it.

2)Connect your Zone 2 speakers to this AV receiver.

Note:

For speaker connections and related cautions, see page 21.

Using Another Amp in Zone 2

With this hookup, you can enjoy 7.1-channel playback in the main room and a different stereo source in Zone 2. If you use a receiver or integrated amp in Zone 2, the volume for Zone 2 is adjusted on that unit. If you use a

power amp with no volume control in Zone 2, the vol-

ume for Zone 2 is adjusted on this AV receiver.

Hookup

•Use an RCA audio cable to connect the AV receiver’s ZONE 2 PRE OUT L/R jacks to an analog audio input on the amp in Zone 2.

•Connect the Zone 2 speakers to the speaker terminals on the amp in Zone 2.

Main room

TV

AV receiver

ZONE 2

LINE OUT

	L
	R
Zone 2
	IN
R	L
	Receiver/integrated amp,
	or power amp

If you’re using a receiver or integrated amp in Zone 2, you don’t need to make any settings to use this hookup. Proceed to “Using Zone 2” on page 112.

If you’re using a power amp with no volume control in Zone 2, you must set the Zone 2 Out setting to Vari- able (see page 111).

Using Only Speakers in Zone 2

With this connection method, you can use 5.1 surround sound in the main room and play a different AV source in Zone 2. The volume for Zone 2 is set on the AV receiver.

Hookup

•Connect your Zone 2 speakers to the AV receiver’s ZONE 2 SPEAKERS terminals.

Main room

TV

AV receiver

Zone 2

LR

You must set the “Powered Zone 2” setting to “Act” (Activated) in order to use this hookup (see page 110).

109