Integra DTR-6.8 Speaker Distance, Press the Receiver button fol, Advanced Setup—Continued

DTR-6.8_En.book Page 91 Wednesday, June 20, 2007 4:16 PM

Advanced Setup—Continued

Speaker Distance

This setting is set automatically by the Automatic

Speaker Setup function (see page 52).

Here you can specify the distance from each speaker to	4
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.

2, 3	1
	2-6
1, 7

5

1 Press the [Receiver] button fol-

lowed by the [Setup] button.

The main menu appears onscreen.

Note:

Speakers that you set to No or None on the Speaker Configuration page (page 88) cannot be selected.

Use the Up and Down []/[ ] buttons to select “Unit,” and then use the Left and Right []/[ ] buttons to select:

feet: Select if you want to enter dis- tances in feet. Can be set from

0.2to 30 feet in 0.2-feet steps.

meters: Select if you want to enter distances in meters. Can be set from 0.06 to 9 meters in 0.06-meter steps.

Use the Up and Down []/[ ] buttons to select “Left,” and then use the Left and Right []/[ ] buttons to specify the distance.

Specify the distance from the front left speaker to your listening position.

2

3

Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press [Enter].

The Speaker Setup menu appears.

2.Speaker Setup

1.Speaker Settings

2.Speaker Config

3.Speaker Distance

4.Level Calibration

5.Equalizer Settings

6.THX Audio Setup

Use the Up and Down []/[ ] buttons to select “3. Speaker Dis- tance,” and then press [Enter].

The Speaker Distance menu appears.

2–3. Speaker Distance

Unit	feet
Left	12.0ft
Center	12.0ft
Right	12.0ft
Surr Right	7.0ft
Surr Back R	7.0ft
Surr Back L	7.0ft
Surr Left	7.0ft
Subwoofer	12.0ft

6	Repeat step 5 for all speakers.
7	Press the [Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

91