Integra DTR-6.8 instruction manual Tuning / Enter Preset

DTR-6.8_En.book Page 70 Wednesday, June 20, 2007 4:16 PM

Listening to the Radio—Continued

■ Category Search Mode

1	Press the [Receiver] button, fol-
	lowed by the [Enter] button to
	select “Category Search” mode.

Tuning / Enter Preset

2	Use the Left and Right [	]/[	]
	buttons to select a category, and
	use the Up and Down [	]/[	]
	buttons to select a channel in
	that category.

■Direct Tuning

You can select a SIRIUS Satellite Radio channel directly by entering its number.

1	Press the [Receiver] button, fol-
	lowed by the [D. TUN] button.
	The [Receiver] button flashes.

2	Within 8 seconds, use the num-
	ber buttons to enter the channel
	number.

The channel is selected.

For example, to select channel #20, press 0, 2, 0, or 2, 0, [Enter].

Note:

While the [Receiver] button is flashing, the input source cannot be changed by using the remote controller.

Notes:

•If you select an unavailable channel, “INVALID CHANNEL” appears on the display.

•If you select a channel that you are not subscribed to, “CALL SIRIUS” appears on the display.

•If you select a channel that is locked, you’ll need to enter your 4-digit PIN number to listen to that channel. See “Parental Lock” on page 71 for more information.

70

Memory		Return
	Display
Tuning Mode

Number
buttons
	D.TUN
CH + / –	Enter
Setup	Return

Selecting SIRIUS Satellite Radio Channels from the Front Panel:

1	Press the [Tuning Mode] button
	to select “Channel Search” or
	“Category Search” mode.

2	Press [Enter] repeatedly to select
	a category.

3	Use the Tuning Up and Down [ ]/
	[ ] buttons to select a channel.

In Channel Search mode, you can select any channel.

In Category Search mode, you can only select channels from the currently selected category.