Integra DTR-6.8 Digital Input Setup, Buttons to select 4. Digital, Input, and then press Enter

DTR-6.8_En.book Page 49 Wednesday, June 20, 2007 4:16 PM

First Time Setup—Continued

Digital Input Setup

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed.

Here are the default assignments.

Input selector	Default assignment
DVD	COAX 1
VCR/DVR	COAX 2
CBL/SAT	COAX 3
GAME/TV	OPT 1
AUX	FRONT
TAPE	- - -
CD	OPT 2
PHONO	- - -

When HDMI IN 1, 2 or 3 is assigned to an input selector in the “HDMI Input Setup” on page 46, the input selec- tor assignment on this page is automatically set to HDMI 1, HDMI 2 or HDMI 3.

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down []/[ ] buttons to select “1. Input/Out- put Assign,” and then press [Enter].

The Input/Output Assign menu appears.

1. Input/Output Assign

1. Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Input

3	Use the Up and Down [ ]/[ ]
	buttons to select “4. Digital
	Input,” and then press [Enter].
	The Digital Input menu appears.
	1–4. Digital Input
	DVD	COAX 1
	VCR/DVR	COAX 2
	CBL/SAT	COAX 3
	GAME/TV	OPT 1
	AUX	FRONT
	TAPE	- - -
	TUNER	- - -
	CD	OPT 2
	PHONO	- - -

4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select COAX 1, COAX 2, COAX 3, OPT 1, OPT 2, or - - - (analog).

• An input selector that has been assigned to IN 1, IN 2 or IN 3 in the “HDMI Input Setup” (see page 46) can be set to HDMI here.

• There are no assignments for

TUNER.

• AUX is used only for digital input from the front panel terminals. When HDMI IN 1, 2 or 3 is assigned to AUX in the “HDMI Input Setup” on page 46, IN 1, IN 2 or IN 3 can be selected.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD” to “OPT 1.”

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT 2.”

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the CBL/SAT input selector is selected, set “CBL/ SAT” to “COAX 1.”

For input selectors that you don’t want to assign a digital input jack, set to “- - - (analog).”

5	Press the [Setup] button.
	The Setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

49