Integra DTR-6.8 Positioning the XM Mini-TunerSystem, The Satellite Radio menu appears, Notes

DTR-6.8_En.book Page 65 Wednesday, June 20, 2007 4:16 PM

Listening to the Radio—Continued

Tuning / Enter

Setup

Positioning the XM Mini-Tuner System

You can check the signal strength of the XM radio signal and adjust the position of the XM Mini-Tuner System accordingly.

1	On the AV receiver, press the
	[Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down []/[ ] buttons to select “4. Source Setup,” and then press [Enter]. The Source Setup menu appears.

4. Source Setup

TUNER

1.IntelliVolume

2.A/V Sync

3.Name Edit

4.Satellite Radio

Note:

If the Satellite Radio mode is set to

None (see page 62), the “4. Satellite

Radio” item is not available.

3	Use the Up and Down [ ]/[ ]
	buttons to select “4. Satellite
	Radio,” and then press [Enter].
	The Satellite Radio menu appears.
	4-4. Satellite Radio
	XM Antenna Aiming
	Satellite	Terrestrial

Adjust the position of the XM Mini-Tuner Antenna so that the SAT/TER signal strength bar is as long as possible.

The best signal is achieved when the antenna is pointing to the southern sky through an unobstructed window. Terrestrial (TER) signals are only avail- able in certain areas.

So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial reception.

Notes:

•The XM information is only displayed when the Sat- ellite Radio mode is set to XM or XM/SIRIUS (see page 62).

•If you’re using both XM Satellite Radio and SIRIUS Satellite Radio and the Satellite mode is set to XM/ SIRIUS (see page 62), signal strength meters for both systems appear on the same screen.

65