Integra DTR-6.8 OSD Setup, Advanced Setup—Continued, Press the Receiver button fol

DTR-6.8_En.book Page 104 Wednesday, June 20, 2007 4:16 PM

Advanced Setup—Continued

OSD Setup		4
1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select

“6. Miscellaneous,” and then press [Enter].

The Miscellaneous menu appears.

6. Miscellaneous

1.Volume Setup

2.OSD Setup

3.12V Trigger A Setup

4.12V Trigger B Setup

5. 12V Trigger C Setup

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. OSD Setup,”
	and then press [Enter].
	The OSD Setup menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Monitor Type	4 : 3
	Display Position	Bottom
	TV Format	Auto

5

Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right []/ [ ] buttons to set them.

These settings determine how the oper- ation details are displayed.

Immediate Display

This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted.

On: Displayed (default).

Off: Not displayed.

Even when On is selected, operation details may not be output if the input source is connected to a COMPO- NENT VIDEO IN or HDMI IN.

For optimal video performance, THX recommends that Immediate Display be turned off.

Monitor Type

With this preference, you can specify the aspect ratio of your TV so that the operation details are displayed prop- erly.

4 : 3: Select if your TV is 4 : 3 (default).

16 : 9: Select if your TV is 16 : 9.

Display Position

This preference determines where on the screen operation details are dis- played.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

TV Format (not North American model)

See “TV Format Setup (not North American model)” on page 50.

When you’ve finished, press the [Setup] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

104