Specifications, Amplifier Section, Video Section, General

7_Appendix_En.fm Page 121 Thursday, June 21, 2007 2:20 PM

Specifications

Rated Output Power (FTC)

All channels:	100 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven from 20 Hz to 20 kHz, with a
	maximum total harmonic distortion of
	0.08%
	115 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.7%
	125 watts minimum continuous power
	per channel, 6 ohm loads, 2 channels
	driven at 1 kHz with a maximum total
	harmonic distortion of 0.1%
Rated Output Power (IEC)
	7 ch ⋅ 160 W at 6 ohms, 1 kHz, 1 ch
	driven
Maximum Output Power (JEITA)
	7 ch ⋅ 175 W at 6 ohms, 1 kHz, 1 ch
	driven
Dynamic Power	240 W + 240 W (3 Ω, Front)
	210 W + 210 W (4 Ω, Front)
	120 W + 120 W (8 Ω, Front)
THD (Total Harmonic Distortion)
	0.08% (Power Rated)
	0.08% (1 kHz, 1 W)
Damping Factor	60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance
	200 mV/47 kΩ (LINE)
	2.5 mV/47 k Ω, (PHONO MM)
Phono Overload	70 mV (MM 1 kHz, 0.5%)
Output Level and Impedance
	200 mV/470 Ω (REC OUT)
Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB (Direct mode)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	106 dB (LINE, IHF-A)
	80 dB (PHONO, IHF-A)
Speaker Impedance	4 Ω - or 6 Ω - 16 Ω

Input Sensitivity/Output Level and Impedance

1Vp-p/75 Ω (Component and S-Video Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 0.28 Vp-p/75 Ω (S-Video C)

1Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 50 MHz - 3 dB

FM Tuning Frequency Range

Digital Tuner (North American models only):

XM, SIRIUS

■Video Inputs

■Video Outputs

■Audio Inputs

■Audio Outputs

■Control Terminal

Specifications and features are subject to change without notice.

121