Integra DTR-6.8 TV Format Setup not North American model, The OSD Setup menu appears

DTR-6.8_En.book Page 50 Wednesday, June 20, 2007 4:16 PM

First Time Setup—Continued

TV Format Setup

(not North American model)

You must specify the TV system used in your area.

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down []/[ ]

buttons to select

“6. Miscellaneous,” and then press [Enter].

The Miscellaneous menu appears.

6. Miscellaneous

1.Volume Setup

2.OSD Setup

3.12V Trigger A Setup

4.12V Trigger B Setup

5. 12V Trigger C Setup

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. OSD Setup,”
	and then press [Enter].
	The OSD Setup menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Monitor Type	4 : 3
	Display Position	Bottom
	TV Format	Auto

4 Use the Up and Down []/[ ] buttons to select “TV Format,” and then use the Left and Right []/[ ] buttons to select:

Auto: Select this to automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

50