Panasonic DMC-ZS6 Printing, Select PictBridge PTP on the camera, To cancel print Press MENU/SET

Printing

You can connect directly to a PictBridge- compatible printer for printing.

Getting Ready:

•Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler (optional).

•Insert card and set mode dial to any setting except. When copying pictures from the built-in memory, remove any memory cards. (Copy [CLIPBOARD] pictures to the card in advance)

•Adjust the print quality or other settings on your printer, as needed.

Turn on power of camera and printer

Connect camera to printer

•Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.

Select [PictBridge (PTP)] on the camera

•Do not disconnect the USB connection cable when the cable disconnection icon is displayed (may not be displayed with some printers).

Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)

Example of DMC-ZS7

When [CONNECTING TO PC…] is displayed, cancel the connection and set [USB MODE] (→26) to either [SELECT ON CONNECTION] or [PictBridge (PTP)].

Press ◄► to select a picture to print and press [MENU/SET]

Select [PRINT START]

USB connection cable (always use cable supplied)

■To cancel print Press [MENU/SET]
	(Print settings (→146))

●Do not use any other USB connection cables except the supplied one. ●Disconnect USB connection cable after printing.

●Turn off power before inserting or removing memory cards.

●When the battery begins to run out during communication, a warning beep sounds. Cancel printing and disconnect USB connection cable (recharge the battery before reconnecting).

●Setting the [USB MODE] to [PictBridge (PTP)] removes the need to make the setting each time the camera is connected to the printer.

●Motion pictures recorded in [AVCHD Lite] format cannot be printed.

144 VQT2R20