Panasonic DMC-ZS6 GPS Setting Using GPS, Select GPS Setting from, Travel Mode menu →20

Before use, read “About GPS” (→8) and “User License Agreement for Location Name Data” (→165).

[GPS SETTING]: Using GPS

Select [GPS SETTING] from		■When checking GPS reception
the Travel Mode menu (→20)		Select [INFO] in Step to check the
Select	[ON] or	current reception.
		• Set [GPS SETTING] to [ON] or (→85)
		Received GPS time
		Number of GPS satellite
		signals received

•To cancel, select [OFF]

Close the menu

	Latitude and longitude
		• Press [MENU/SET] to start positioning
[GPS SETTING]	Description			Positioning operation timing
[ON]	●Positioning continues even when the camera’s			When the camera’s
	power is off, so you can record pictures with			power is on
	location name information recorded on them as			• Immediately after the
	soon as you turn on the power again.			power is turned on
	●Because the positioning continues even when the			• Every 5 minutes
	camera’s power is off, battery power is consumed.			When the camera’s
	●When the camera’s power is off, the positioning			power is off∗
	stops in the following cases. If the positioning			• Every 15 minutes
	stops, the positioning will take some time, after			∗ The status indicator
	turning on the camera's power.			flashes when
	• When the battery level is low,		comes on, or	positioning.
	the battery is replaced
	• When positioning is not successful for 2 hours
	after the camera’s power is turned off
	• When the camera’s power has not been turned
	on for 3 hours
	●The positioning may take some time, after turning			When the camera’s
	on the camera’s power. Location name information			power is on∗
	will not be recorded for pictures recorded at this			• Immediately after the
	time while positioning is in progress.			power is turned on
				• Every 5 minutes
				∗ Positioning is not
				performed when the
				camera’s power is off.

●Positioning is not possible unless signals are received from three or more GPS satellites. Move to a location where the sky is as clear as possible before performing positioning.

VQT2R20 85