Aiwa CX-NMT50 manual Press the + E button to start play, To select a reverse mode deck 2 only

BASIC OPERATIONS

Deck 2

●On deck 1, tapes are always played back on both sides.

On deck 2, you can select a reverse mode to play back one or both sides.

●Use Type I (normal), Type 11(high/CrOz) or Type IV (metal) tapes for playback.

7 Press the TAPE button and press the 4 EJECT mark to open the cassette holder.

4 EJECT-

U1

Insert a tape with the exposed side down. Push the cassette holder to close.

2 Press the + E button to start play.

The tape counter indicates

Playing deck number the tape running length.

Playback side indicator

-: The front side is being played (forward).

+: The back side is being played (reverse)

To select a reverse mode (deck 2 only)

Each time the REV MODE button is pressed, the reverse mode

changes.

Z+I)+C=)J

To play one side only, select =.

To play from front side to reverse side once only, select 1). To play both sides repeatedly, select C).

●When tapes are loaded in both decks, =) on the display indicates Continuous Play.

When tapes are loaded in both decks

Press the TAPE button first to select a deck.

The selected deck number is displayed.

To stop play, press the ■ button.

To pause play (deck 2 only), press the 11 button. To resume play, press again.

To change the playback side, press the 4 ➤ DIRECTION/ PRESET button in play or pause mode.

To fast forward or rewind, press the + or - button. Then press the Z button to stop the tape.

To start play when the power is off (Direct Play Function)

Press the TAPE button. The power k turned on and play of the inserted tape begins.

To set the tape counter to 0000

Press the N CLEAR button in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

If a television is used near this unit during tape playback, noise may be heard from the speakers. In this case, turn the television off.

I 1 ENGLISH