Aiwa CX-NMT50 Continuous Play, Musiic Sensor, Press the REV MODE button to select, Q@, detection

MUSIIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

Press the + or > button during playback referring to the playback side indicator (4 or b) on the display.

For example, when the - button is pressed while E is displayed, playback of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

c Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

●Low c,verall recording levels

CONTINUOUS PLAY

“1

u

After playback on one deck finishes, the tape in the other deck will start to play without interruption,

1 Insert tapes into deck 1 and deck 2.

2 Press the TAPE/DECKl/2 button to select the deck to be played back first.

3 Press the REV MODE button to select 11.

4 Press the +> button to start playback.

Playback continues until the ■ button is pressed.

.

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

~o
(q
\ Q@
_
;a	\
Type II tape	Tab for side A
detection
slot	*
L	J

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

●120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism,

—

EAfGL/SH I :?