Aiwa CX-NMT50 Al EDIT RECORDING, Insert the tape into deck, Press the CD EDIT/CHECK button ~

Al EDIT RECORDING

w L-_ _

The Al edit function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short.

(Al: Artificial Intelligence)

m

Al edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press the CD button and load the disc(s).

3Press the CD EDIT/CHECK button ~.

“EDIT”and “AI”light upon the display.

When “PRGM” is displayed, press the CD EDIT/CHECK button again,

4 Press one of the DISC DIRECT PLAY buttons to select a disc.

5 Press the + or - button to designate the tape length.

10 to 99 minutes can be specified.

In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.

●The numbered buttons on the remote control are also available to designate the tape length.

Example: When using a 60-minute tape, press the 6 and O buttons,

	Tape side A	Selected
Tape length	(front side)	tracks for side A

Remaining time of side A

6 Press the ● REC/REC MUTE button to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.

To stop recording

Press the ■ button. Recording and CD play stop simultaneously.

To clear the edit program

Press the ■ CLEAR button twice so that “EDIT”disappears on the display.

To check the order of the programmed track numbers

Before recording, press the CD EDIT/CHECK button to select

side A or B, and press the + or - button repeatedly.

Track number	Programmed
	track numbers

Program number

To add tracks from other discs to the edit program

If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment .

1Press the CD EDIT/CHECK button to select side A or B.

2Press one of the DISC DIRECT PLAY buttons to select a disc.

3Press the numbered buttons on the remote control to select tracks. PRGM appears on the display.

A track whose playing time is longer than the remaining time cannot be programmed.

4Repeat steps 2 and 3 to add more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark).

●Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

●The Al edit function cannot be used with discs containing 31 tracks or more.

I5 ENGLISH