Aiwa CX-NMT50 Programmed Play, Ranidom /Repeat Play, Example, Press the + button to start play

RANIDOM /REPEAT PLAY

Use the remote control.

RANDC)M play

All the tracks on the selected disc or on all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press the RANDOM/REPEAT button.

Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REF’EAT play — G lights up on the display. RANI]OM/REPEAT play — RANDOM and ~ light upon the display.

Cancel — RANDOM and ~ go out from the display.

To play all discs, press the +> button to start play.

To play a single disc, press the DISC DIRECT PLAY button, then press one of the numbered buttons (l-3) within 3 seconds to start Iplay.

m

During random play, the following operations are not possible: -to select the tracks directly with the numbered buttons.

-to skip to the previously played track with the ●< button.

PROGRAMMED PLAY

Up to :30 tracks can be programmed from any of the inserted discs.

Use the remote control

1 Press the PRGM button twice in stop mode.

The PRGM indicator lights up on the display.

PRGM

*When the PRGM button is pressed once in step 1, the unit enl.ers the KARAOKE PROGRAM (see page 20).

2Press the DISC DIRECT PLAY button, then press

one of the numbered buttons 1 to 3 within 3 se(conds to select a disc.

The selected disc is indicated in red on the display. Go to the next step when the tray stops rotating.

3 Press the numbered buttons and the +1 Clbutton to program a track.

Example:

To select the 25th track, press the +1O, +1O and 5 buttons. To select the 10th track, press the +1O and O buttons.

	Total playing	time c,f
Program number	the selected	tracks

Selected track number	Total number of
	selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press the +> button to start play.

To check the program

Each time the 4 or > button is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press the ■ CLEAR button in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press the RANDOM/REPEAT button repeatedly until c& appears on the display.

During programmed play, you cannot perform random play, check the remaining time, and select a disc or track.

ENGLISH 10