Panasonic DMC-ZS6 REC Area, Economy Sleep Mode, OFF/2 MIN./5 MIN./10 MIN, LCD Power Save OFF/ON

Using the [SETUP] menu (Continued)

For details about the setting procedure in the [SETUP] menu (→20)

		Item	Settings, notes
		[REC AREA]	[OFF]/[ON]	This section is not
			• Recordable area displayed for motion	recorded.
	Enables verification of		pictures should be interpreted as a
			Guideline.
	the recordable area for		• When using Extended Optical Zoom,
	a motion picture before		the recordable area may not always be
			displayed for certain zoom ratios.
	recording.
			• This setting cannot be used with Intelligent
			Auto Mode.
		[ECONOMY]	[SLEEP MODE]
Turn off the power or			[OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]:
make the LCD monitor			Automatically shut off power while not in use.
go dark while not using			• To restore → Press the shutter button halfway, or turn on
the camera to minimize			the power again.
battery consumption.			• Cannot be used in the following cases:
			When using AC adaptor (optional) and DC coupler
			(optional), when connected to computer/printer, during
			motion picture recording/playback, during Slide Shows,
			during automatic demo playback

•Settings fixed to [5 MIN.] in [INTELLIGENT AUTO] Mode or [CLIPBOARD] Mode, or [10 MIN.] while Slide Show is paused.

[LCD POWER SAVE] [OFF]/[ON]:

The LCD monitor goes dark to minimize power consumption.

•Reduces the picture quality of the LCD monitor display during recording to minimize battery consumption (except for the Digital Zoom area). Note, however, that there is no effect on the recorded picture.

•When [LCD MODE] is set, the brightness of the LCD monitor follows the setting in [LCD MODE], but the picture quality of the LCD monitor stays at a low level.

24 VQT2R20
	[REC AREA] is not available in the DMC-ZS6/DMC-ZS5.