Panasonic DMC-ZS6 Continuous AF, Wind CUT, Recording Mode Settings OFF/ON appears on the screen

For [MOTION PICTURE] menu setting procedures (→20)

■Settings:

[AVCHD Lite(GPS REC)] in [REC MODE]

Setting	Resolution	Bit rate∗1	Aspect ratio
[GSH]	1280 x 720	17 Mbps	16:9
[GH]	1280 x 720	13 Mbps
[GL]	1280 x 720	9 Mbps

[AVCHD Lite] in [REC MODE]

Setting	Resolution	Bit rate∗1	Aspect ratio
[SH]	1280 x 720	17 Mbps	16:9
[H]	1280 x 720	13 Mbps
[L]	1280 x 720	9 Mbps

[MOTION JPEG] in [REC MODE]

Setting	Resolution	Frame rate∗2	Aspect ratio
[HD]	1280 x 720	30 fps	16:9
[WVGA]	848 x 480	30 fps
[VGA]	640 x 480	30 fps	4:3
[QVGA]	320 x 240	30 fps

∗1 The bit rate is the amount of data per unit time. A higher value translates into a higher image quality. This camera uses the VBR (Variable Bit Rate) recording system and the available recording time is shorter when recording a subject with rapid movements.

∗2 The frame rate is the number of frames per second. ●[WVGA] cannot be set in [INTELLIGENT AUTO] Mode. ●[QVGA] only can be recorded to the built-in memory.

[CONTINUOUS AF]

Either allow the focus to be constantly adjusted during motion picture recording, or fix the focus position at the start of recording.

■Recording Mode:

■Settings: [ON] : Adjust focus according to movement of subject during motion picture

recording. ( appears on the screen.)

[OFF] : Fix focus position at the start of motion picture recording.

Use this setting to keep the same focus position for subjects with little forward/backward movement.

●The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.

[WIND CUT]

Reduces recording of wind sounds (wind noise) when recording in a strong wind

■Recording Mode:

■Settings: [OFF]/[ON] ( appears on the screen.)

●When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality will differ from that of normal recordings.

VQT2R20 109