Panasonic DMC-ZS6 operating instructions Focus range according to ISO Sensitivity and zoom, ISO80

Taking pictures with flash (Continued)

Recording Mode:

■Available types in each mode (○: Available, –: Not available, : Default setting)

○∗

○

○

○

○

○

–

○

– – – – – ○

– ○

○ –

○

–

–

–

– – – – – ○

– ○

○

○

○

○

–

○

– – ○

○ – ○

– – – –

–

–

–

–

○

○ – – – –

– ○ – –

–

–

○

–

○

○ – – ○ –

○

○

○

○

○

○

○

○

○

○ – ○

○

○

∗Set to (Auto), (Auto/Red-Eye Reduction), (Slow Sync./Red-Eye Reduction) or (Slow Sync.) depending on the subject and brightness.

•The flash cannot be used when recording motion pictures, Scene Modes , , , , , , or .

■Focus range according to ISO Sensitivity and zoom

		Focus range
		Max. W	Max. T
	AUTO	Approx. 0.6-5.3 m (1.97-17.4 feet)	Approx. 1.0-3.6 m (3.28-11.8 feet)
	ISO80	Approx. 0.6-1.5 m (1.97-4.92 feet)	Approx. 1.0m (3.28 feet)
[SENSITIVITY]	ISO100	Approx. 0.6-1.6 m (1.97-5.24 feet)	Approx. 1.0-1.1 m (3.28-3.61 feet)
	ISO200	Approx. 0.6-2.3 m (1.97-7.54 feet)	Approx. 1.0-1.6 m (3.28-5.25 feet)
(→97)
	ISO400	Approx. 0.6-3.3 m (1.97-10.8 feet)	Approx. 1.0-2.2 m (3.28-7.22 feet)
	ISO800	Approx. 0.8-4.7 m (2.62-15.4 feet)	Approx. 1.0-3.2 m (3.28-10.5 feet)
	ISO1600	Approx. 1.15-6.7 m (3.77-22.0 feet)	Approx. 1.0-4.5 m (3.28-14.8 feet)
[INTELLIGENT ISO]	ISOMAX400	Approx. 0.6-3.3 m (1.97-10.8 feet)	Approx. 1.0-2.2 m (3.28-7.22 feet)
	ISOMAX800	Approx. 0.8-4.7 m (2.62-15.4 feet)	Approx. 1.0-3.2 m (3.28-10.5 feet)
(→96)
	ISOMAX1600	Approx. 1.15-6.7 m (3.77-22.0 feet)	Approx. 1.0-4.5 m (3.28-14.8 feet)
[HIGH SENS.]	ISO1600-	Approx. 1.15-13.5 m (3.77-44.3 feet)	Approx. 1.0-9.1 m (3.28-29.9 feet)
(→66)	ISO6400
[FLASH BURST]	ISO100-	Approx. 0.6-3.4 m (1.97-11.2 feet)	Approx. 1.0-2.3 m (3.28-7.54 feet)
(→67)	ISO3200

●Do not put your hands over the light-emitting area of the flash (→9, 10) or look at it from close range (a few centimeters away).

Do not use the flash at close distances to other subjects (heat/light may damage subject). ●Flash settings may be changed when changing Recording Mode.

●Scene Mode flash settings are restored to default when Scene Mode is changed. ●Edges of picture may become slightly dark if using flash at short distances without

using zoom (close to max. W). This may be remedied by using a little zoom.

●If flash is to be emitted, flash type marks (e.g. ) will turn red when shutter button is pressed halfway.

●No pictures may be taken if these marks (e.g. ) are flashing (flash is charging). ●Insufficient flash reach may be due to inadequately set exposure or White Balance. ●Flash effect may not be fully achieved with high shutter speeds.

●Flash charging may take time if battery is low, or if using flash repeatedly.

48 VQT2R20