Panasonic DMC-ZS6 LCD Mode, Auto Power LCD, Display Size STANDARD/LARGE, Guide Line REC. Info

For details about the setting procedure in the [SETUP] menu (→20)

	Item	Settings, notes
	[LCD MODE]	[OFF]: Normal (cancel setting)
Make LCD monitor easier		[AUTO POWER LCD]:
to see.		The brightness is adjusted automatically depending on
		how bright it is around the camera.
		[POWER LCD]:
		Makes screen brighter than normal (for outdoor use).
		• [AUTO POWER LCD] does not work in the following cases:
		During playback, during menu display, when connected to
		computer/printer.
		• [POWER LCD] returns to ordinary brightness if there is no
		operation for 30 seconds when recording. (Press any button to
		make brighter again).
		• Because the picture shown on the LCD monitor screen
		emphasizes brightness, some subjects may look different than
		their actual appearance, but this will not affect the recorded
		picture.
		• Block out sunlight (with hand, etc.) if reflection makes screen
		difficult to see.
		• Setting [LCD MODE] will reduce the number of pictures that can
		be recorded and recording time.
		• When [LCD POWER SAVE] is set, the brightness of the LCD
		monitor follows the setting in [LCD MODE], but the picture quality
		of the LCD monitor stays at a low level.
	[DISPLAY SIZE]	[STANDARD]/[LARGE]
Change the display size
of the menu.
	[GUIDE LINE]	[REC. INFO.]
Select recording		[OFF]/[ON] (Display recording information with guide
information display and		lines.)
types of guidelines. (→46)
		[PATTERN]
		/ : Change the patterns of guide lines.
	[HISTOGRAM]	[OFF]/[ON]
Check subject brightness
on graph. (→46)

VQT2R20 23