Beko DCU 8230 manual Child-proof lock, Finishing by canceling the programme, Deactivated

Page 17

3. Press “Start/Pause/Cancel” button to start the programme.

C Press “Start/Pause/Cancel” button for 3 seconds to cancel the programme or turn the programme selection knob in any direction to end the programme while the machine is running. Water tank and filter cleaning warning lights turn on to warn the user when the programme is cancelled by pressing the “Start/Pause/ Cancel” button for 3 seconds. However, the warning lights do not turn on when the programme is cancelled by turning the programme selection knob. Only the drying light turns on and the machine remains in hold until a new programme is selected and the “Start/Pause/Cancel” button is pressed. Child-proof lock of the machine should not be active in order to perform these two operations. If the child-proof lock is active, deactivate it before performing these operations.

Adding/removing laundry in standby mode

In order to add or remove laundry after the programme starts:

1. Press the “Start/Pause/Cancel” button to switch the dryer to “Pause” mode. Drying process will stop.

2. Open the door at “Pause” position and close it again after adding or taking out laundry.

3. Press “Start/Pause/Cancel” button to start the programme.

C Any laundry added after the drying process has started may cause the dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.

C Laundry may be added or taken out as much as desired during a drying process, but this process will extend the programme duration and increase energy consumption since the drying will be interrupted continuously. Therefore, it is recommended to add laundry before the drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any programme interruption due to the pressing of button while the programme is running. The loading door and all buttons except the “On/Off” button on the control panel are deactivated when the child-proof lock is active.

Press the “Start/Pause/Cancel” and “Cancel

17

audio warning” buttons simultaneously for 3 seconds to activate the child-press lock.

To start a new programme after the programme is over or to interrupt the programme, the child- proof lock should be deactivated. Press the same buttons for 3 sec. again to deactivate the child- proof lock.

CChild-proof lock is deactivated when the machine is restarted by pressing the On/ Off button.

CPress the relevant buttons for 3 seconds to activate the child-proof lock. A long beep will be heard and the child-proof lock will be activated. A double beep will be heard if you press any button

or turn the programme selection knob while the child-proof lock is active. Press the buttons for 3 seconds to deactivate the child-proof lock. Single beep will be heard and child-proof lock will be

deactivated.

A A double beep will be heard if you turn the programme selection knob when the machine is running and the child- proof lock is active. If you deactivate the child-proof lock without returning the programme selection knob to its previous position, the programme will be terminated since the position of the programme selection knob is changed. The drying light turns on and the machine remains on hold until a new programme is selected and the “Start/ Pause/Cancel” button is pressed.

Finishing by canceling the programme

To cancel any selected programme:

Press “Start/Pause/Cancel” button for about 3 seconds. The “Filter cleaning”, “Water tank” and “End/ Anti-creasing” warning lights will turn on at the end of this period for reminding purposes.

A As the inside of the dryer will be excessively hot when you cancel the programme while the dryer is running, activate the ventilation programme to cool it down.

EN

Image 17
Contents DCU Read this manual prior to initial operation of the product Explanation of symbolsTable of Contents Your Dryer Kick plate opening tab Fluff filter Adjustable feetOverview Control panelTechnical Specifications Do not use electrical devices in the product Important safety instructionsGeneral safety Intended use Children’s safetyInstallation First use Adjusting the feetDisposing of packaging material Transportation of the machineElectrical requirements This appliance can be installed under a worktopThis appliance must be earthed Fitting a different plugThings to be done for energy saving Initial preparations for dryingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineCorrect load capacity Following weights are given as examplesPreparing laundry for drying Control panel Selecting a Programme and OperatingYour MachineProgramme selection Preparing the machine 1. Plug in your machineCottons / Coloreds Programme selection and consumption tableAuxiliary function Time delayStarting the programme Progress of programmePress Start/Pause/Cancel button to start the programme Finishing by canceling the programmeAdding/removing laundry in standby mode Child-proof lock18 EN End of programmeFilter Cartridge / Door Inner Surface Maintenance and cleaningSensor Water tankPlace the water tank into its seat For the condenserSuggested solutions for problems What is covered? GuaranteeWhat is not covered? Important notes

DCU 8230 specifications

The Beko DCU 8230 is a highly efficient and innovative tumble dryer designed to simplify laundry care while ensuring optimal results. This freestanding model is particularly well-suited for consumers seeking a balance between performance, capacity, and energy efficiency.

One of the standout features of the Beko DCU 8230 is its 8 kg capacity. This spacious drum allows users to dry larger loads in a single cycle, making it an excellent option for families or anyone who regularly handles bulky items, such as bedding or towels. The dryer also incorporates a range of programs tailored to various fabric types, ensuring gentle and effective drying for everything from delicate garments to heavy duty textiles.

The dryer boasts a variety of sensor drying programs, which are equipped with advanced technology to monitor moisture levels in the drum. This allows the machine to automatically adjust the drying time, optimizing both performance and energy usage. With this feature, users can save time and reduce energy consumption, making the dryer a more environmentally friendly choice.

In terms of energy efficiency, the Beko DCU 8230 is rated as class B. This classification signifies that while the dryer may not be the absolute most efficient, it still performs well in minimizing energy use. It also features an easy-to-empty condenser tank, which collects moisture during the drying process and eliminates the need for external venting. This makes it a versatile option for homes where venting may not be practical.

Another notable characteristic of the Beko DCU 8230 is its user-friendly interface. The control panel includes a clear display, helping users easily navigate through the various settings. Additionally, the dryer runs quietly, ensuring minimal disruption in the home environment.

Overall, with its combination of capacity, advanced technology, and energy-efficient design, the Beko DCU 8230 is an excellent choice for those seeking a reliable and effective tumble dryer. Its innovative features not only streamline the drying process but also contribute to a more environmentally conscious approach to household laundry.