Beko DCU 8230 manual Installation

Page 8

3Installation

Refer to the nearest Authorised Service Agent

for installation of your product.

C Preparation of location and electrical installation for the product is under customer’s responsibility.

BInstallation and electrical connections must be carried out by a qualified personnel.

A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety.

Appropriate installation location

• Install the product in an environment which has no risk of freezing and is in a stable and level position.

• Operate your product in a well ventilated, dust-free environment.

• Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden bands.

• Do not place your product on a long pile rug or on similar surfaces.

• Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.

• Once the product is installed, it should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does not touch anywhere (tap, socket, etc.) and also pay attention to install the product at a place where it will stay permanently.

B Do not place the product on top of the power cable.

•Keep at least 1.5 cm distance to walls of other furniture.

Removing the transportation safety assembly

ARemove the transportation safety assembly before using the product for the first time.

1.Open the loading door.

2.There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX.

3.Pull the nylon towards yourself and remove the transportation safety assembly.

AMake sure that you have removed the transportation safety assembly (nylon+styrofoam pieces) before using the product for the first time. Do not leave any items inside the drum.

Under counter installation

•A special part (Part no. 297 360 0100) replacing the top trim must be provided and installed by the Authorised Service Agent in order to use the machine under a counter or in a cupboard. It should never be operated without the top trim.

•Leave at least 3 cm of space between the side and rear walls of the product and the walls of the counter/cupboard when installing your product under a counter or in a cupboard.

Mounting over a washing machine

•A fitting device should be used between the two machines when installing above a washing machine. The bracket must be installed by the Authorised Service Agent.

•Place the product on a firm floor. If it will be placed on top of a washing machine, the approximate weight of both machines may reach 180 kg when they are full. Therefore, the floor must be capable of carrying the load on it!

Connection to water drain;

In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank. You should drain the accumulated water after each washing cycle.

You can directly send the accumulated water out through the water drain hose supplied

8

EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DCU Explanation of symbols Read this manual prior to initial operation of the productTable of Contents Kick plate opening tab Fluff filter Adjustable feet Your DryerOverview Control panelTechnical Specifications Do not use electrical devices in the product Important safety instructionsGeneral safety Children’s safety Intended useInstallation Adjusting the feet First useDisposing of packaging material Transportation of the machineThis appliance can be installed under a worktop Electrical requirementsThis appliance must be earthed Fitting a different plugInitial preparations for drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineCorrect load capacity Following weights are given as examplesPreparing laundry for drying Selecting a Programme and OperatingYour Machine Control panelPreparing the machine 1. Plug in your machine Programme selectionProgramme selection and consumption table Cottons / ColoredsTime delay Auxiliary functionStarting the programme Progress of programmeFinishing by canceling the programme Press Start/Pause/Cancel button to start the programmeAdding/removing laundry in standby mode Child-proof lockEnd of programme 18 ENMaintenance and cleaning Filter Cartridge / Door Inner SurfaceSensor Water tankFor the condenser Place the water tank into its seatSuggested solutions for problems Guarantee What is covered?What is not covered? Important notes

DCU 8230 specifications

The Beko DCU 8230 is a highly efficient and innovative tumble dryer designed to simplify laundry care while ensuring optimal results. This freestanding model is particularly well-suited for consumers seeking a balance between performance, capacity, and energy efficiency.

One of the standout features of the Beko DCU 8230 is its 8 kg capacity. This spacious drum allows users to dry larger loads in a single cycle, making it an excellent option for families or anyone who regularly handles bulky items, such as bedding or towels. The dryer also incorporates a range of programs tailored to various fabric types, ensuring gentle and effective drying for everything from delicate garments to heavy duty textiles.

The dryer boasts a variety of sensor drying programs, which are equipped with advanced technology to monitor moisture levels in the drum. This allows the machine to automatically adjust the drying time, optimizing both performance and energy usage. With this feature, users can save time and reduce energy consumption, making the dryer a more environmentally friendly choice.

In terms of energy efficiency, the Beko DCU 8230 is rated as class B. This classification signifies that while the dryer may not be the absolute most efficient, it still performs well in minimizing energy use. It also features an easy-to-empty condenser tank, which collects moisture during the drying process and eliminates the need for external venting. This makes it a versatile option for homes where venting may not be practical.

Another notable characteristic of the Beko DCU 8230 is its user-friendly interface. The control panel includes a clear display, helping users easily navigate through the various settings. Additionally, the dryer runs quietly, ensuring minimal disruption in the home environment.

Overall, with its combination of capacity, advanced technology, and energy-efficient design, the Beko DCU 8230 is an excellent choice for those seeking a reliable and effective tumble dryer. Its innovative features not only streamline the drying process but also contribute to a more environmentally conscious approach to household laundry.
Top Page Image Contents