Beko DCU 8230 manual Important safety instructions, General safety

Page 6

2Important safety instructions

This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure

to follow these instructions shall cause any warranty and reliability commitment to become void.

General safety

•Never place the machine on a carpet- covered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.

•If the power cable or mains plug is damaged, you must call Authorised Service Agent for repair.

•The product should not be plugged in during installation, maintenance and repair works. Such works should always be made by the technical service. Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.

•Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table.

•Operate your product at temperatures between +5°C and +35°C.

•Do not use electrical devices in the product.

•Do not connect the air exit of the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel.

•You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.

•Always clean the lint filter before or after each loading.

•Never operate your dryer without the lint filter installed.

•Do not allow fibre, dust and dirt accumulation around the exhaust exit and at adjacent areas.

•Power cable plug must be within easy reach after installation.

•Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock.

•Do not make any changes on the plug

6

supplied with the product. If it is not compatible with the socket, have a qualified electrician change the socket with a suitable one.

•Items cleaned or washed with gasoil/ fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.

•Do not dry items cleaned with industrial chemicals in the dryer.

•Do not dry unwashed items in the dryer.

•Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

•Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.

•Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the fabric softener or the product.

•This product must be earthed.

Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure. Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product. This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations.

•Do not install the product behind a door with a lock, sliding door or a door that has a hinge against the hinge of the dryer.

•Do not install or leave this product in places where it will be exposed to outdoor conditions.

•Do not tamper with the controls.

•Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the

EN

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DCU Explanation of symbols Read this manual prior to initial operation of the productTable of Contents Overview Kick plate opening tab Fluff filter Adjustable feetYour Dryer Control panelTechnical Specifications Important safety instructions General safetyDo not use electrical devices in the product Children’s safety Intended useInstallation Disposing of packaging material Adjusting the feetFirst use Transportation of the machineThis appliance must be earthed This appliance can be installed under a worktopElectrical requirements Fitting a different plugLaundry suitable for drying in the machine Initial preparations for dryingThings to be done for energy saving Laundry unsuitable for drying in the machineFollowing weights are given as examples Preparing laundry for dryingCorrect load capacity Selecting a Programme and OperatingYour Machine Control panelPreparing the machine 1. Plug in your machine Programme selectionProgramme selection and consumption table Cottons / ColoredsStarting the programme Time delayAuxiliary function Progress of programmeAdding/removing laundry in standby mode Finishing by canceling the programmePress Start/Pause/Cancel button to start the programme Child-proof lockEnd of programme 18 ENSensor Maintenance and cleaningFilter Cartridge / Door Inner Surface Water tankFor the condenser Place the water tank into its seatSuggested solutions for problems What is not covered? GuaranteeWhat is covered? Important notes

DCU 8230 specifications

The Beko DCU 8230 is a highly efficient and innovative tumble dryer designed to simplify laundry care while ensuring optimal results. This freestanding model is particularly well-suited for consumers seeking a balance between performance, capacity, and energy efficiency.

One of the standout features of the Beko DCU 8230 is its 8 kg capacity. This spacious drum allows users to dry larger loads in a single cycle, making it an excellent option for families or anyone who regularly handles bulky items, such as bedding or towels. The dryer also incorporates a range of programs tailored to various fabric types, ensuring gentle and effective drying for everything from delicate garments to heavy duty textiles.

The dryer boasts a variety of sensor drying programs, which are equipped with advanced technology to monitor moisture levels in the drum. This allows the machine to automatically adjust the drying time, optimizing both performance and energy usage. With this feature, users can save time and reduce energy consumption, making the dryer a more environmentally friendly choice.

In terms of energy efficiency, the Beko DCU 8230 is rated as class B. This classification signifies that while the dryer may not be the absolute most efficient, it still performs well in minimizing energy use. It also features an easy-to-empty condenser tank, which collects moisture during the drying process and eliminates the need for external venting. This makes it a versatile option for homes where venting may not be practical.

Another notable characteristic of the Beko DCU 8230 is its user-friendly interface. The control panel includes a clear display, helping users easily navigate through the various settings. Additionally, the dryer runs quietly, ensuring minimal disruption in the home environment.

Overall, with its combination of capacity, advanced technology, and energy-efficient design, the Beko DCU 8230 is an excellent choice for those seeking a reliable and effective tumble dryer. Its innovative features not only streamline the drying process but also contribute to a more environmentally conscious approach to household laundry.
Top Page Image Contents