Asko TL751XXL Cleaning the lint filter, Loading or removing laundry, Dry program finished

Operating instructions

6 Press the Start button Remaining drying item

The remaining drying time will be shown on the display. For example, 1:35 means it will take approximately 1 hour and 35 minutes for the load to dry. If the Anti- crease option has been selected, the drum will rotate until you press the Power button or Start/Stop button.

Note!

•The program will not be affected if you change the program selector after the program has started.

•The program will continue from where the program was interrupted if you close the door and press the Start button within 10 minutes. If the program is interrupted for more than 10 minutes, the dryer will be shut off. Select new program settings before restarting the dryer.

Cleaning the lint filter

1. Open the door and pull the filter straight up.

2.The filter may need to be cleaned if it has lime-scale deposits. See the “Care and maintenance” chapter.

8 Once drying has finished Turn off the power switch. Remove the clothes and close the door to prevent

small children from climbing into the machine.

Loading or removing laundry

If you want to load or remove laundry once you have started the machine, open the door and the program will stop. Add more laundry or take out the items you want, close the door, and press the Start/Stop button

Dry program finished
The text “END” appears on the display
7 when the program has ended. If the
Anti-crease option has been selected, the
drum will periodically rotate until you press
Power button or Start/Stop button.
Important!
Clean the lint filter after each load.
Caution!
If the lint filter becomes clogged, the
machine’s automatic overheating cut-off may
be triggered.	13

Customer Care Center

1-800-898-1879

www.askousa.com