Asko TL751XXL Problem There Is Lint On My Clothes, Problem The Drying Time Is Not Consistent

Question

What to Do

• Is your lint filter full?

Please refer to the manual section on cleaning the lint filter, and

please confirm that the lint filter is clean. It is important that the lint

filter is clean before each new load of laundry.

• Did you properly sort your load of

In order to reduce the amount of lint in a load of laundry, sort lint

laundry?

producers (like a fuzzy white cotton towel) separately from clothes

that might catch lint (such as a pair of black linen pants).

• Do your clothes have excess static

See comments below under. There Is Static In My Clothes After

electricity?

Drying.

• Did you overload your dryer?

Divide your larger load into smaller loads.

• Did you place any paper, tissue, or

Sometimes a person might forget to take a piece of paper or a tissue

other similar material in the load?

out of a pocket, and this paper, tissue, or similar material can cause

excess lint in a load of laundry.

Confirm that the pockets of pants, shirts, and other articles of

clothing are empty before washing and drying.

Question

What to Do

• Did you use fabric softener?

Try using a fabric softener to reduce static electricity.

• Did you over dry the load of laundry?

Over-drying a load of laundry can cause a build up of static

electricity. Try using a fabric softener or adjust your settings and use

a shorter drying time.

• Are you drying synthetic, permanent

These materials can cause static to build up in a load of dried

press and blends?

clothes. Try using a fabric softener.

Question

What to Do

• Are you using consistent heat

The drying time for a load will vary depending on the heat setting,

settings and consistent load sizes?

the type of heat used (electric, natural or LP gas), the size of the

load, the type of fabrics, the wetness of the clothes and the condition

of the exhaust ducts and lint filter.

Question

What to Do

• Is water found around cabinet cover

This is normal because this is condensed moisture by drying.

when opening the door?