JVC KD-SX1500R Radio Operations, Listening to the radio, Select the band FM1, FM2, FM3 or AM

ENGLISH

RADIO OPERATIONS

Listening to the radio

2 LO/RPT 1

1

Select the band (FM1, FM2, FM3 or AM).

FM/AM You can select any one of FM1, FM2, and FM3 to listen to an

FM station.

FM1 FM2 FM3AM

Clock time (or other indications: see also page 28) appears.

2

To search stations of higher frequencies

To search stations of lower frequencies

Start searching a station.

When a station is received, searching stops.

•If the program received is broadcast in stereo, the ST indicator lights up on the display.

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in a particular frequency without searching

1 Press FM/AM repeatedly to select the band (FM or AM).

2 Press and hold ¢ or 4 until “Manual” starts flashing on the display. Now you can manually change the frequency while “Manual” is flashing.

3 Press ¢ or 4 repeatedly until the frequency you want is reached.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM–MW/LW) until you release the button.

To tune in FM stations only with strong signals

Press LO/RPT (Local/Repeat) so that “Local On” appears on the display. Each time you press the button, “Local On” and “Local Off” alternates.

To tune in all receivable FM stations, press LO/RPT (Local/Repeat) again so that “Local Off” appears.

Note:

This function only works while searching FM stations including SSM preset (see page 7).

6