English
Various button initial status for "Normal program"
Cycle Signal | Softer |
Wrinkle Care | Off |
Cycles | Normal |
Nixie display | Indicate current program remaining time |
Temp | High |
Sensor Dryness Level | More Dry |
Timed/Cycles |
2. Press "Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other full automatic program is desired, press
Customized |
|
Normal | Bulky Items |
Heavy | Permanent Press |
| Cycles |
Cotton | Delicate |
Initial status of various buttons when setting
Cycles | Normal | Heavy | Cotton | Delicate |
| Permanent Press | Bulky Items |
Wrinkle Care | To be used together with reserve function, off if reserve is disabled | ||||||
Cycle Signal |
|
|
| Softer |
|
| |
Delay Start | Indicate current selected program remaining time | ||||||
|
|
|
|
|
|
|
|
Timed/ Cycles |
|
|
| Auto Dry |
|
| |
|
|
|
|
|
|
|
|
Temp | High | High | Midium | Low |
| Air Only(No Heat) | High |
Dryness Level |
|
|
| More Dry |
|
| |
|
|
|
|
|
|
|
|
Notes: If "Customized" is selected, various buttons will indicate previous conditions set by the user.
"Customized" function is a program designed to facilitate user's operation. It can memorize programs defined by user himself and display the previous program upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customized" status, then set "Cycles" to Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button or after half a minute, the program defined by user himself will be stored and will be directly displayed upon next use.
Notes: Pressing "Sensor Dryness Level" button will be inactive during use of "Customized" function.
17