Other Features

English

1.Press "Power On/Off" button to power on

2.Press "Timed/Cycles" button and select "Rack Dry" cycle

After powering on, press "Timed/Cycle" button to select "Rack Dry" program.

3. Press "More Time" And "Less Time" buttons to set a suitable time

After setting "Timed/Cycle" to "Rack Dry" , you can press these two buttons to

increase or decrease drying time as you desires.

4-7. Press buttons "Temp", "Cycle Signal", "Delay Start", and "Wrinkle Care" to define your desired program

Notes: For "Rack Dry" program, use of buttons "Temp", "Cycle Signal", and "Wrinkle Care" is the same as for auto-programs. "Sensor Dryness Level" is here inactive, pressing of which will get alarms.

8. Press "Start/Pause" button

Your dryer also has the following features for your convenience:

Lint Filter:

All dryers come with a lint filter that needs to be cleaned before or after every use (read “Care and CleaningGuide” Section).

Leveling Legs:

•Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After installingyour dryer in its final position,

you can level your dryer.

•Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer.