English
Installation in Mobile Home
•Dryer must be exhausted outside (outdoors, not beneath the mobile home) using metal ducting that will not support combustion.
Metal ducting must be 4 inches (10.16 cm) in diameter with no obstructions. Rigid metal duct is preferred.
•If dryer is exhausted through the floor and area beneath the mobile home is enclosed, the exhaust system must terminate outside the enclosure with the termination securely fastened to the mobile home structure.
•Refer to previous pages for other important venting requirements.
•Installation must conform to current Manufactured Home Construction & Safety Standard (which is a Federal Regulation Title 24
Warning: The dryer is designed under ANSI z 21.5.1 for home use only.
DO
DON’T
CorrectIncorrect
DO
DON’T
CorrectIncorrect
DO
DON’T 
Correct
Incorrect
17