JVC KD-SX50M Other Main Functions, Selecting the level meter, Selecting the external component

OTHER MAIN FUNCTIONS

Selecting the level meter

You can select the level display according to your preference.

When shipped from the factory, “AUDIO 2” is selected.

1 Press and hold SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M,”

“LEVEL,” or “EXT IN”*

appears on the display.

*Displayed only when FM, AM, or CD is selected as the source.

2 Select “LEVEL” if not shown on the display.

3 Select the desired mode.

•AUDIO 1: Shows the audio level indicator.

•AUDIO 2: Alternates “AUDIO 1” setting

	and illumination display.
• OFF:	Erases the audio level indicator.

4 Finish the setting.

Selecting the external component
	ENGLISH
Adapter KS-U57 (not supplied).
You can connect the external component to the
CD changer jack on the rear using the Line Input
To use the external component as the playback
source through this unit, you need to select which
component to use—CD changer or external
component.
When shipped from the factory, “CHANGER” is
selected.

1 Press and hold SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M,” “LEVEL,” or “EXT IN”*

appears on the display.

*Displayed only when FM, AM, or CD is selected as the source.

2 Select “EXT IN” if not shown on the display.

3 Select the desired mode.

• CHANGER: To use the CD changer.

• LINE IN:	To use the external component
	other than CD changer.

4 Finish the setting.

Note:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

15