JVC KD-SX50M, KD-SX60WT Basic Operations, Turning on the power, To drop the volume in a moment

Page 5

BASIC OPERATIONS

1 32

Turning on the power	Volume (or audio) level indicator

	(see page 15)

1 Turn on the power.

ENGLISH

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.

To operate the tuner (FM or AM), see pages 7 – 9.

To play a CD,

see pages 10 – 12.

To operate the CD changer, see pages 17 – 20.

To operate the external component (LINE IN), see page 21.

3 Adjust the volume.

To increase the volume

To decrease the volume

Volume level appears.

4 Adjust the sound as you want. (See pages 13 and 14.)

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

•If you turn the control dial, you can also restore the sound.

To turn off the power

Press and hold for more than one second.

“SEE YOU” appears, then the unit turns off.

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

CAUTION on Volume Setting:

Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

5

Image 5

Contents For customer Use Recepteur CDStandby/on/attenuator SEL select How to reset your unitInformation For U.S.A Contents Location of the Buttons Mode buttonControl panel Display windowTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsSetting the clock Listening to the radio Radio OperationsSearching for a station automatically Auto search Searching for a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tune in to a station you want while M manual is flashingP1 flashes for a few seconds Manual presetSelect the band FM1 3, AM Playing a CD CD OperationsTo stop play and eject the CD Insert a CD into the loading slotTo fast-forward or reverse the track How to use the +10 and -10 buttonsTo go to the next or previous tracks To go to a particular track directlySelecting CD playback modes Prohibiting CD ejection To cancel the prohibition and unlock the CDTo play back tracks at random Disc Random Play To play back tracks repeatedly Track Repeat PlaySelecting preset sound modes C-EQ custom equalizer Sound AdjustmentsSelect the sound mode you want For Preset valuesVOL Loud Adjusting the soundBAS TRE Selecting the external component Other Main FunctionsSelecting the level meter Connectors You can detach the control panel when leaving the carDetaching the control panel Attaching the control panelHierarchy CD Changer OperationsAbout MP3 discs Select the CD changer CD-CH To go to a particular disc directlyCD-CH To go to a track/file quickly +10 and -10 buttons To fast-forward or reverse the track/fileTo skip to the next or previous folder only for MP3 discs To go to the next or previous tracks/filesMode Active Plays at random Indicator CanceledMode Active Plays repeatedly Indicator Disc RND MAG RNDCD Line External Component OperationsSelect the external component Line Stored in memory are erased TroubleshootingSymptoms Causes Remedies Changer Handling discs MaintenanceAM Tuner SpecificationsFM Tuner Call Tiene alguna pregunta o necesita información acerca de las GET0157-002AJDe equipos de audio para automóviles o a una compañía que Slot RanuraRemarque NotaFuse blows No sound from the speakersBe sure to ground this unit to the car’s chassis External component JVC CD changer