JVC KD-SH9105 manual To go to a particular disc directly, To change the display pattern

ENGLISH

•When the current disc is an MP3 disc:

1

To go to a particular disc directly

Press the number button corresponding to the disc number to start its playback (while the CD changer is playing).

1 2 3 4 5 6

		•	To select a disc number from 1	– 6:
			Press 1 (7) – 6 (12) briefly.
		•	To select a disc number from 7	– 12:
2	3	4	Press and hold 1 (7) – 6 (12) for more than 1
			second.

To fast-forward or reverse the track

5 6 7

1Disc number

2 Disc type—MP3

3 Album title/performer (or folder name when “Tag” is set to “Off”—see page 42, or when no Tag is recorded)

4 Track title (or track name when “Tag” is set to “Off”—see page 42, or when no Tag is recorded)

5 Current folder number

6 Current track number

7 Elapsed playing time of the current track

Press and hold ¢ , while playing a disc, to fast-forward the track.

Press and hold 4, while playing a disc, to reverse the track.

Note:

During this operation on an MP3 disc, you can only hear intermittent sounds. (The elapsed playing time also changes intermittently on the display.)

To change the display pattern

By pressing DISP (D), you can change the information shown on the display.

Each time you press the button, the

Ddisplay patterns change.

DISP • For details, see page 24.

If you change the source or turn off the unit

Disc play also stops.

Next time you select “CD-CH” as the source, disc play starts from where it has been stopped previously.

To go to the next track or the previous tracks

Press ¢ briefly, while playing a disc, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back.

Press 4 briefly, while playing a disc, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.

48