JVC KD-SH9105 manual Select Opening opening screen, Setting or Ending ending screen, Select User

7To delete more files, repeat from steps 5 and

6.

8 Press DISP (D) to resume the	D
source indication screen.
	DISP

Activating the downloaded images and animations

To activate the animations stored for opening and ending screens

After the unit turns on or before the unit turns off, you can see preset animations on the display. These are called opening screen and ending screen. You can use your own edited animations for these opening and ending screens.

•Opening and ending screens will not be shown if the “KeyIn CFM” setting is set to “Short" or “Off.” (See page 41).

•If no animation is stored in “PowerOn” and

“PowerOff,” “Opening” and “Ending” will not be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 40.)

SEL

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

1 2 3 4 5 6

The “Graphics” setting screen appears on the display.

3 Select “Opening” (opening screen
	ENGLISH
setting) or “Ending” (ending screen
setting).

Ex. When you select “Opening”

4 Select “User.”

ATT

•Default: Factory-preset animation is used.

•User: Your own edited animation is used.

5 Finish the setting.

SEL

To activate the graphic screen using either picture or movie

Using this setting, you can change the graphic displays. These graphic screen appears if no operation is done for about 20 seconds.

•If no image is stored in “Picture,” or no animation in “Movie,” “UserPict.” will not be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 40.)

SEL

CONTINUED ON THE NEXT PAGE

37