JVC KD-SH99R manual Setting the TA volume level, Automatic clock adjustment

Page 15

Changing the display mode while listening to an FM station

You can change the initial indication on the display to station name (PS NAME) or station frequency (FREQUENCY) while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 30.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4to select “TUNER DISP” (tuner display).

3Turn the control dial to set to the desired indication (“FREQUENCY” or “PS NAME”).

4Press SEL (select) to finish the setting.

Note:

By pressing D (display), you can change the display while listening to an FM RDS station only.

Each time you press the button, the following information appears on the display:

Station name

(PS NAME)

Station frequency

(FREQ)

Programme type

(PTY)

•Then, the display goes back to the original indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 30.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL.”

3 Turn the control dial to set to the desired volume. You can set it from “TA VOL 00” to “TA VOL 50.”

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 30.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ.” 3 Turn the control dial counterclockwise to select

“ADJUST OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ADJUST ON” in step 3 by turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ADJUST ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

ENGLISH

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents KD-SH99R Precautions How to reset your unitContents How to use M/B mode/band Location of the ButtonsControl panel Remote controller Return the battery holder Installing the batteryRemove the battery holder Place the batteryTo drop the volume in a moment To turn off the powerBasic Operations Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Manual preset Tuning into a preset stationMode 1 Mode 2 Mode RDS OperationsMode To deactivate the TA standby mode, press TP Using Standby ReceptionTA Standby Reception PTY Standby ReceptionTo store your favorite programme types Press SEL select to finish the settingSearching your favorite programme Selecting your favorite programme for PTY Standby ReceptionYou want Code selected into the preset numberPress and hold the number button for More than 2 seconds to store the PTYSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes Open the loading slot CD OperationsPlaying a CD To stop play and eject the discTo fast-forward or reverse the track To go to a particular track directlyTo play back tracks at random Random Play To play back only intros Intro scan Select text display mode while playing a CD TextProhibiting disc ejection Playing a CD TextMP3 Introduction What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW Other Main Features in this unitHierarchy MP3 directory/file configurationMP3 playback/search order Movement between the directoriesInsert an MP3 disc into the loading slot When TAG on is selected initial setting seeMP3 Operations Playing an MP3 discTo change the display information To fast-forward or reverse the fileTo skip to the next file or the previous files On the control panel On the remote controllerTo go to a particular directory directly To select a particular file in a directory, pressTo skip to the next directory on the same hierarchy level To skip to the directories on the lower hierarchy levelsTo skip to the directories on the upper hierarchy levels RPT1 RPT2 CanceledTo play back files repeatedly Repeat Play To play back files at random Random PlayVOL Woofer Sound AdjustmentsAdjusting the sound BassPress EQ Select the sound mode you wantStoring your own sound adjustments Press SEL select to select sound elements to adjustIndication Preset values Other Main Functions Setting the clockChanging the general settings PSM Basic Procedure24H/12H Preferred Setting Mode PSM itemsTo select the scroll mode Scroll To select the dimmer mode DimmerTo turn on/off the power amplifier switch To adjust the display contrast levelTo change the FM tuner selectivity To adjust the line input level Line ADJTo adjust the auxiliary input level To turn the demo mode on or off Demo ModeSelect a source you want to assign a name to To erase the input charactersSelect the character set you want while Is flashing Select a characterChanging the control panel angle When using the remote controllerAdjust the angle to the position you want To restore the control panel to its original positionDetaching the control panel Attaching the control panelUnlock the control panel MD player, etc When you select a source, the power automatically comes onExternal Component Operations Select the external component AUX Input or Line InputWhen connecting a DVD player When connecting a VCRAdjust the sound you want. See To go to the next track or the previous tracks CD Changer OperationsPlaying CDs Select the CD automatic changer CD ChangerINT1 INT2 To go to a particular disc directlyTo play back tracks repeatedly Repeat Play RND2What is DAB system? Select the DAB tunerSelect the DAB band DAB1, DAB2, or DAB3 Start searching an ensemble Select a service you want to listen toService name Ensemble name Channel number Frequency To tune into a particular ensemble without searchingSelect the DAB band DAB 1, DAB 2 or DAB 3 you want Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want Tuning into a preset DAB serviceSelect the number 1 6 for the preset DAB service you want To use Alternative ReceptionSound modes preset value settings Additional InformationAvailable characters Symptoms Causes Remedies TroubleshootingMP3 Moisture condensation MaintenanceHow to handle discs Handling discsLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Before mounting Press Vor dem Einbau Drücken Sie Avant le montage Appuyer surBegint Druk op Opmerking Twist the core wires when connectingSolder the core wires to connect them securely Gerät geliefertAvant de commencer la connexion Vérifiez IlluminationExtérieur à cet appareil, diminuez le réglage du Koppel de speakers van dit apparaat los enLassen Lors de la connexion d’un amplificateur
Related manuals
Manual 50 pages 41.85 Kb Manual 4 pages 1.85 Kb Manual 41 pages 46.82 Kb

KD-SH99R specifications

The JVC KD-SH99R is an innovative car stereo that exemplifies a blend of advanced technology and user-friendly design, making it a preferred choice for music enthusiasts. This high-performance head unit is known for its impressive audio quality and numerous features that cater to both casual listeners and audiophiles.

One of the standout features of the KD-SH99R is its ability to play various media formats, including CDs, MP3, and WMA files. This versatility ensures that users can enjoy their favorite tracks regardless of the medium. The front USB port allows for seamless connectivity with digital devices, giving users the ability to play music directly from USB flash drives. Additionally, the inclusion of an auxiliary input allows for easy connection of smartphones and portable media players, expanding the music options available.

Sound quality is paramount in any car audio system, and the KD-SH99R does not disappoint. It is equipped with a powerful 50 watts per channel output, delivering a robust audio experience that can fill any car interior. The unit features a 3-band parametric equalizer, which allows users to fine-tune their audio settings to achieve the perfect sound that suits their preference. Moreover, the built-in high-pass and low-pass filters offer enhanced control over the frequencies, ensuring that all elements of the music come through clearly.

Another notable feature is the JVC's exclusive K2 Technology, which enhances the quality of compressed audio files, producing a clearer and more dynamic sound. This is particularly beneficial for digital music files which can often lose vibrancy during compression.

For those who value customization, the KD-SH99R offers variable color illumination, allowing users to match the display with their car's interior lighting. This customization is aesthetically pleasing and adds a personal touch to the stereo.

In terms of connectivity, the KD-SH99R is compatible with Bluetooth technology, enabling hands-free calling and wireless music streaming. This feature enhances the driving experience, allowing drivers to stay connected while keeping their focus on the road. The unit also includes AM/FM radio with RDS, providing access to a wide range of radio stations.

In conclusion, the JVC KD-SH99R is a feature-rich car stereo designed to enrich any driving experience. With its high power output, versatile media playback options, advanced sound technologies, and user-friendly design, it stands as an excellent choice for anyone looking to elevate their in-car audio system.
Top Page Image Contents