JVC KD-SH99R To erase the input characters, Select the character set you want while Is flashing

Page 34

ENGLISH

Assigning names to the sources

You can assign names to CDs and the external components.

After assigning a name, it will appear on the display when you select the source.

Sources

Maximum number of

 

the characters

CDs*

up to 32 characters

 

(up to 40 discs)

 

 

External components

up to 10 characters

(LINE INPUT and

 

AUX INPUT)

 

 

 

*You cannot assign a name to a CD Text or an MP3 disc.

3 Select the character set you want while

“” is flashing.

Each time you press the button, the character set changes as follows:

Capital letters ( ) Small letters ( )

Numbers and symbols ( )

4 Select a character.

About the available characters, see page 45.

1 Select a source you want to assign a name to.

Each time you press the button, the source changes

as described on page 7.

5 Move the cursor to the next

(or previous) character position.

2 Press and hold SEL (select) for more than 2 seconds while pressing D (display).

6 Repeat steps 3 to 5 until you finish inputting the name.

7 Finish the procedure while the last selected character is flashing.

To erase the input characters

When you select “CD PLAY” as the source

Insert spaces using the same procedure described above.

Notes:

• When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)

• When the CD changer is connected, you can assign names to discs in the CD changer. These names can also be shown on the display if you insert the discs in this unit.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents KD-SH99R How to reset your unit PrecautionsContents Location of the Buttons How to use M/B mode/bandControl panel Remote controller Place the battery Installing the batteryRemove the battery holder Return the battery holderTo turn off the power To drop the volume in a momentBasic Operations Searching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tuning into a preset station Manual presetRDS Operations Mode 1 Mode 2 ModeMode PTY Standby Reception Using Standby ReceptionTA Standby Reception To deactivate the TA standby mode, press TPSelecting your favorite programme for PTY Standby Reception Press SEL select to finish the settingSearching your favorite programme To store your favorite programme typesMore than 2 seconds to store the PTY Code selected into the preset numberPress and hold the number button for You wantAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station PTY codes To stop play and eject the disc CD OperationsPlaying a CD Open the loading slotTo go to a particular track directly To fast-forward or reverse the trackTo play back tracks at random Random Play Playing a CD Text Select text display mode while playing a CD TextProhibiting disc ejection To play back only intros Intro scanOther Main Features in this unit What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW MP3 IntroductionMovement between the directories MP3 directory/file configurationMP3 playback/search order HierarchyPlaying an MP3 disc When TAG on is selected initial setting seeMP3 Operations Insert an MP3 disc into the loading slotTo fast-forward or reverse the file To change the display informationTo skip to the next file or the previous files To select a particular file in a directory, press On the remote controllerTo go to a particular directory directly On the control panelTo skip to the directories on the lower hierarchy levels To skip to the next directory on the same hierarchy levelTo skip to the directories on the upper hierarchy levels To play back files at random Random Play CanceledTo play back files repeatedly Repeat Play RPT1 RPT2Bass Sound AdjustmentsAdjusting the sound VOL WooferSelect the sound mode you want Press EQPress SEL select to select sound elements to adjust Storing your own sound adjustmentsIndication Preset values Basic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsPreferred Setting Mode PSM items 24H/12HTo adjust the display contrast level To select the dimmer mode DimmerTo turn on/off the power amplifier switch To select the scroll mode ScrollTo turn the demo mode on or off Demo Mode To adjust the line input level Line ADJTo adjust the auxiliary input level To change the FM tuner selectivitySelect a character To erase the input charactersSelect the character set you want while Is flashing Select a source you want to assign a name toTo restore the control panel to its original position When using the remote controllerAdjust the angle to the position you want Changing the control panel angleAttaching the control panel Detaching the control panelUnlock the control panel Select the external component AUX Input or Line Input When you select a source, the power automatically comes onExternal Component Operations MD player, etcWhen connecting a VCR When connecting a DVD playerAdjust the sound you want. See Select the CD automatic changer CD Changer CD Changer OperationsPlaying CDs To go to the next track or the previous tracksRND2 To go to a particular disc directlyTo play back tracks repeatedly Repeat Play INT1 INT2Select the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2, or DAB3 To tune into a particular ensemble without searching Select a service you want to listen toService name Ensemble name Channel number Frequency Start searching an ensembleStoring DAB services in memory Select the DAB band DAB 1, DAB 2 or DAB 3 you wantTo use Alternative Reception Tuning into a preset DAB serviceSelect the number 1 6 for the preset DAB service you want Select the DAB band DAB1, DAB2 or DAB3 you wantAdditional Information Sound modes preset value settingsAvailable characters Troubleshooting Symptoms Causes RemediesMP3 Handling discs MaintenanceHow to handle discs Moisture condensationMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Vor dem Einbau Drücken Sie Avant le montage Appuyer sur Before mounting PressBegint Druk op Gerät geliefert Twist the core wires when connectingSolder the core wires to connect them securely OpmerkingIllumination Avant de commencer la connexion VérifiezLors de la connexion d’un amplificateur Koppel de speakers van dit apparaat los enLassen Extérieur à cet appareil, diminuez le réglage du
Related manuals
Manual 50 pages 41.85 Kb Manual 4 pages 1.85 Kb Manual 41 pages 46.82 Kb

KD-SH99R specifications

The JVC KD-SH99R is an innovative car stereo that exemplifies a blend of advanced technology and user-friendly design, making it a preferred choice for music enthusiasts. This high-performance head unit is known for its impressive audio quality and numerous features that cater to both casual listeners and audiophiles.

One of the standout features of the KD-SH99R is its ability to play various media formats, including CDs, MP3, and WMA files. This versatility ensures that users can enjoy their favorite tracks regardless of the medium. The front USB port allows for seamless connectivity with digital devices, giving users the ability to play music directly from USB flash drives. Additionally, the inclusion of an auxiliary input allows for easy connection of smartphones and portable media players, expanding the music options available.

Sound quality is paramount in any car audio system, and the KD-SH99R does not disappoint. It is equipped with a powerful 50 watts per channel output, delivering a robust audio experience that can fill any car interior. The unit features a 3-band parametric equalizer, which allows users to fine-tune their audio settings to achieve the perfect sound that suits their preference. Moreover, the built-in high-pass and low-pass filters offer enhanced control over the frequencies, ensuring that all elements of the music come through clearly.

Another notable feature is the JVC's exclusive K2 Technology, which enhances the quality of compressed audio files, producing a clearer and more dynamic sound. This is particularly beneficial for digital music files which can often lose vibrancy during compression.

For those who value customization, the KD-SH99R offers variable color illumination, allowing users to match the display with their car's interior lighting. This customization is aesthetically pleasing and adds a personal touch to the stereo.

In terms of connectivity, the KD-SH99R is compatible with Bluetooth technology, enabling hands-free calling and wireless music streaming. This feature enhances the driving experience, allowing drivers to stay connected while keeping their focus on the road. The unit also includes AM/FM radio with RDS, providing access to a wide range of radio stations.

In conclusion, the JVC KD-SH99R is a feature-rich car stereo designed to enrich any driving experience. With its high power output, versatile media playback options, advanced sound technologies, and user-friendly design, it stands as an excellent choice for anyone looking to elevate their in-car audio system.
Top Page Image Contents