Installation Procedures

SECTION III

Installation should be performed by competent technicians in accordance with local and state codes. In the absence of these codes, the installation must conform to applicable American National Standards: ANSI Z223.1- LATEST EDITION (National Fuel Gas Code) or ANSI/NFPA NO. 70-LATEST EDITION (National Electrical Code) or in Canada, the installation must conform to applicable Canadian Standards: CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION (for General Installation and Gas Plumbing) or Canadian Electrical Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION (for Electrical Connections).

A. LOCATION REQUIREMENTS

Before installing the dryer, be sure the location conforms to local codes and ordinances. In the absence of such codes or ordinances the location must conform with the National Fuel Gas Code ANSI.Z223.1 LATEST EDITION, or in Canada, the installation must conform to applicable Canadian Standards: CAN/CGA-B149.1- M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION (for General Installation and Gas Plumbing).

1.The dryer must be installed on a sound level floor capable of supporting its weight. Carpeting must be removed from the floor area that the dryer is to rest on.

IMPORTANT: “The dryer must be installed on noncombustible floors only.”

2.The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.

3.The dryer is for use in noncombustible locations.

4.Provisions for adequate air supply must be provided as noted in this manual (refer to Fresh Air Supply Requirements in Section D).

5.Clearance provisions must be made from combustible construction as noted in this manual (refer to Dryer Enclosure Requirements in Section C).

6.Provisions must be made for adequate clearances for servicing and for operation as noted in this manual (refer to Dryer Enclosure Requirements in Section C).

7.The dryer must be installed with a proper exhaust duct connection to the outside as noted in this manual (refer to Exhaust Requirements Section E).

8.The dryer must be located in an area where correct exhaust venting can be achieved as noted in this manual (refer to Exhaust Requirements in Section E).

IMPORTANT: Dryer should be located where a minimum amount of exhaust duct will be necessary.

9. The dryer must be installed with adequate clearance for air openings into the combustion chamber.

Maytag Co.

113395 - 6

MDG-120PVV, MD-170PTVW specifications

American Dryer Corp has long been a trusted name in the laundry equipment industry, and their models MD-170PTVW and MDG-120PVV are no exception. These innovative machines reflect the company’s commitment to quality, performance, and efficiency.

The MD-170PTVW is a high-capacity tumble dryer designed for commercial use. One of its main features is its advanced microprocessor control system, which provides precise operation and programmability. This allows users to customize drying cycles based on specific fabric types and moisture levels, ensuring optimal results every time. The machine is equipped with a large, insulated cylinder that offers efficient heat retention, reducing energy consumption while accelerating drying times.

The MDG-120PVV, on the other hand, is a gas dryer that combines durability with sleek design. This model is particularly noted for its revolutionary airflow system, which maximizes hot air circulation inside the drum, optimizing drying efficiency. The stainless steel drum further enhances durability, providing long life and resistance to wear and tear. With a capacity of 120 pounds, it caters to high-demand environments seamlessly.

Both models showcase Advanced Technology Features such as a high-performance heating system that ensures quick heat-up times and consistent temperature maintenance throughout the drying cycle. This not only enhances drying efficiency but also helps maintain the integrity of fabrics, reducing the risk of damage from overheating.

Safety features are paramount in both dryers, with built-in lint filters and automatic shut-off protections designed to prevent overheating and reduce fire hazards. Energy-efficient designs in both models also cater to environmentally conscious operations, as they meet stringent energy consumption standards.

In conclusion, the MD-170PTVW and MDG-120PVV from American Dryer Corp are engineered to deliver high-performance and reliability in demanding commercial settings. With their array of features, advanced technologies, and robust construction, these machines stand out as ideal solutions for businesses looking to maximize productivity while minimizing operational costs. Whether for laundromats, hotels, or other commercial laundries, American Dryer Corp’s latest offerings continue to set the standard in the industry.