GAS Information | American Dryer Corp MD-170PTVW, MDG-120PVV

G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to ensure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: Failure to comply with these codes or ordinances, and/or the requirements stipulated in this manual, can result in personal injury and improper operation of the dryer.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve VOIDING THE WARRANTY.

WARNING: FIRE OR EXPLOSION COULD RESULT DUE TO FAILURE OF ISOLATING OR DISCONNECTING THE GAS SUPPLYAS NOTED.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the dryer data label. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the dealer who sold the dryer or contact the Maytag Co.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (609.6 meters), unless elevation requirements of over 2,000 feet (609.6 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (609.6 meters) is made by changing each burner orifice. If this conversion is necessary, contact the dealer who sold the dryer or contact the Maytag Co.

Maytag Co.

113395 - 6

MDG-120PVV, MD-170PTVW specifications

American Dryer Corp has long been a trusted name in the laundry equipment industry, and their models MD-170PTVW and MDG-120PVV are no exception. These innovative machines reflect the company’s commitment to quality, performance, and efficiency.

The MD-170PTVW is a high-capacity tumble dryer designed for commercial use. One of its main features is its advanced microprocessor control system, which provides precise operation and programmability. This allows users to customize drying cycles based on specific fabric types and moisture levels, ensuring optimal results every time. The machine is equipped with a large, insulated cylinder that offers efficient heat retention, reducing energy consumption while accelerating drying times.

The MDG-120PVV, on the other hand, is a gas dryer that combines durability with sleek design. This model is particularly noted for its revolutionary airflow system, which maximizes hot air circulation inside the drum, optimizing drying efficiency. The stainless steel drum further enhances durability, providing long life and resistance to wear and tear. With a capacity of 120 pounds, it caters to high-demand environments seamlessly.

Both models showcase Advanced Technology Features such as a high-performance heating system that ensures quick heat-up times and consistent temperature maintenance throughout the drying cycle. This not only enhances drying efficiency but also helps maintain the integrity of fabrics, reducing the risk of damage from overheating.

Safety features are paramount in both dryers, with built-in lint filters and automatic shut-off protections designed to prevent overheating and reduce fire hazards. Energy-efficient designs in both models also cater to environmentally conscious operations, as they meet stringent energy consumption standards.

In conclusion, the MD-170PTVW and MDG-120PVV from American Dryer Corp are engineered to deliver high-performance and reliability in demanding commercial settings. With their array of features, advanced technologies, and robust construction, these machines stand out as ideal solutions for businesses looking to maximize productivity while minimizing operational costs. Whether for laundromats, hotels, or other commercial laundries, American Dryer Corp’s latest offerings continue to set the standard in the industry.