American Dryer Corp MD-170PTVW System Reset, Fire Suppression System Water Valve Check

Page 50

Once the fire suppression system routine is activated, the microprocessor controller (computer) will display “S.A.F.E. SYSTEM ACTIVATED” and water will be injected into the basket (tumbler) chamber. Any time water is being injected into the basket (tumbler), the basket (tumbler) drive will turn the load for 1-second every 15-seconds. This process will continue for a minimum of 2 minutes. After the 2 minutes have elapsed, the microprocessor controller (computer) will check if the temperature remained above trip point; if so, the water will remain on. The microprocessor controller (computer) will continue to check if the temperature is above trip point every 30-seconds. If the water has been on for a constant 10 minutes, the water will be turned off, regardless of the temperature, and the microprocessor controller (computer) will display “S.A.F.E. SYSTEM WAS ACTIVATED”. If the temperature has dropped below trip point, the microprocessor controller (computer) will turn off the water prior to 10 minutes.

SYSTEM RESET

After the microprocessor controller (computer) determines that the situation is under control and shuts the water being injected into the basket (tumbler) off, the microprocessor controller (computer) display will read, “S.A.F.E. SYSTEM WAS ACTIVATED”, and the horn/tone will sound until reset manually.

To reset the microprocessor controller (computer) once the microprocessor controller (computer) displays, “S.A.F.E. SYSTEM WAS ACTIVATED”, press the red “STOP/CLEAR” key on the keypad.

FIRE SUPPRESSION SYSTEM WATER VALVE CHECK

The operation of the water solenoid valve can be tested to ensure that the water supply system and valve are functional. Before attempting a system check, be sure that ALL water supply shutoff valves to the dryer are in the OPEN position, the dryer must be in the “READY” Mode with no cycle loaded or in progress.

1.Press and hold the red “STOP/CLEAR” key (while in “READY” Mode and no cycle is in progress).

2.Press and hold the “A” key.

3.Water valve will open and water will be dispensed into basket (tumbler) area as long as both keys are held.

The microprocessor controller (computer) will prompt the user to perform a fire suppression system valve check at every 4000 hours to ensure proper functionality. At the 4000 hour mark, the microprocessor controller (computer) will wait for end of the cycle and then will prompt the user to “PLEASE EMPTY TUMBLER, THEN PRESS THE ‘STOP/CLEAR’ AND ‘A’ KEYS TO TEST THE WATER VALVE”. When the ‘STOP/ CLEAR’ and ‘A’ keys are pressed, the microprocessor controller (computer) will activate the fire suppression system water valve for 2-seconds, at which point the microprocessor controller (computer) will prompt the user with the following message, “IF WATER DID NOT TURN ON, CALL FOR SERVICE. THANK YOU.”

NOTE: The microprocessor controller (computer) will not let the user continue until the valve test has been completed.

FIRE SUPPRESSION SYSTEM DIAGNOSTICS

In the event that the non-coin microprocessor controller (computer) detects a fault in the fire suppression system, the non-coin microprocessor controller (computer) will display the message, “S.A.F.E. SYSTEM DISABLED…READY”. To find out why the fire suppression system is disabling, press and hold the red “STOP/CLEAR” and green “START” keys. This will cause the microprocessor controller (computer) to display a diagnostic message, as detailed in the “Fire Suppression System Diagnostics Messages” section.

48

Maytag Co.

113395 - 6

Page 49 Page 51
Image 50
Page 49 Page 51
Contents MDG-120PVV / MD-170PTVW Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Safety Precautions SectionMaytag Co Specifications MDG-120 SpecificationsMDG-120 Specifications MD-170 Specifications 84.77 cmMD-170 Specifications Installation Procedures Location RequirementsUNPACKING/SETTING UP Maytag Co 113395 This Exhaust Duct Transition Piece Must be Installed First Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Multiple Dryer Common Venting Electrical Information Electrical RequirementsMD-120 Gas Maytag Co GAS Information Type of GAS Maytag Co 113395 Maytag Co Preparation for Operation Preoperational Test Basket Tumbler Coating Shutdown Instructions Operating InstructionsCompressed Air Pressure Air Supply Operating Steam Pressure Steam Damper System Compressed Air Pressure Air Supply Maytag Co 113395 Parts SERVICE/PARTS InformationService Warranty Warranty InformationReturning Warranty Cards Suggested Cleaning Schedule Routine MaintenanceCleaning Steam Dryers Adjustments LubricationDual Timer Manual Reset Burner HI-LIMIT InstructionsPhase Sectionviii Data Label InformationReversing Timer SPIN/DWELLADJUSTMENTS Timing LegendProcedure for Functional Check Replacement Components Maytag Co 113395 Installation Microprocessor Models onlyTypical Water Supply Optional Manual BypassFire Suppression System Theory of Operation Fire Suppression System Water Valve Check System ResetFire Suppression System Diagnostics Fire Suppression System Diagnostics Messages 05/01/07

MDG-120PVV, MD-170PTVW specifications

American Dryer Corp has long been a trusted name in the laundry equipment industry, and their models MD-170PTVW and MDG-120PVV are no exception. These innovative machines reflect the company’s commitment to quality, performance, and efficiency.

The MD-170PTVW is a high-capacity tumble dryer designed for commercial use. One of its main features is its advanced microprocessor control system, which provides precise operation and programmability. This allows users to customize drying cycles based on specific fabric types and moisture levels, ensuring optimal results every time. The machine is equipped with a large, insulated cylinder that offers efficient heat retention, reducing energy consumption while accelerating drying times.

The MDG-120PVV, on the other hand, is a gas dryer that combines durability with sleek design. This model is particularly noted for its revolutionary airflow system, which maximizes hot air circulation inside the drum, optimizing drying efficiency. The stainless steel drum further enhances durability, providing long life and resistance to wear and tear. With a capacity of 120 pounds, it caters to high-demand environments seamlessly.

Both models showcase Advanced Technology Features such as a high-performance heating system that ensures quick heat-up times and consistent temperature maintenance throughout the drying cycle. This not only enhances drying efficiency but also helps maintain the integrity of fabrics, reducing the risk of damage from overheating.

Safety features are paramount in both dryers, with built-in lint filters and automatic shut-off protections designed to prevent overheating and reduce fire hazards. Energy-efficient designs in both models also cater to environmentally conscious operations, as they meet stringent energy consumption standards.

In conclusion, the MD-170PTVW and MDG-120PVV from American Dryer Corp are engineered to deliver high-performance and reliability in demanding commercial settings. With their array of features, advanced technologies, and robust construction, these machines stand out as ideal solutions for businesses looking to maximize productivity while minimizing operational costs. Whether for laundromats, hotels, or other commercial laundries, American Dryer Corp’s latest offerings continue to set the standard in the industry.
Top Page Image Contents