American Dryer Corp MD-170PTVW, MDG-120PVV Typical Water Supply, Optional Manual Bypass

Page 48

2.Water Connections:

The water connection is made to the 3/4”-11.5 NH hose adapter of the electric water solenoid valve, located at the rear upper midsection of the dryer (refer to the photograph).

The water solenoid valve has a 3/8” M.P.T. connection supplied with a 3/4”-11.5 NH hose adapter to provide the minimum 1/2-inch supply (feed) line. Flexible supply line/coupling must be used in an effort to avoid damaging the electric water solenoid valve.

NOTE: The 3/4”-11.5 NH is a standard hose coupling screw thread. It is not to be confused with 3/4” N.P.T. The sealing of an NH connection is made with a washer opposed to the mating threads of an N.P.T. assembly. The two (2) thread designs are not compatible.

IMPORTANT: Flexible supply line/coupling must be used. Solenoid valve failure due to hard plumbing connections WILL VOID WARRANTY. It is recommended that a filter or strainer be installed in the water supply line.

Typical Water Supply

OPTIONAL MANUAL BYPASS

Provisions are made in the dryer’s fire suppression system for the installation of an optional manual bypass. Depending on the model dryer, the connections for the manual bypass are made at the “T” or “three way” fitting located in the outlet supply side of the water solenoid valve. The use and connections of this manual bypass are at the option or discretion of the owner.

The water connection for the manual bypass is made to the “T” or “three way” fitting, which has a 3/8” F.P.T. and a coupling must be used to provide the minimum 1/2” supply (feed) line.

If the rear area of the dryer or the water supply is located in an area where it will be exposed to cold/freezing temperatures, provisions must be made to protect these water lines from freezing.

46

Maytag Co.

113395 - 6

Page 47 Page 49
Image 48
Page 47 Page 49
Contents MDG-120PVV / MD-170PTVW Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Safety Precautions SectionMaytag Co Specifications MDG-120 SpecificationsMDG-120 Specifications MD-170 Specifications 84.77 cmMD-170 Specifications Installation Procedures Location RequirementsUNPACKING/SETTING UP Maytag Co 113395 This Exhaust Duct Transition Piece Must be Installed First Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Multiple Dryer Common Venting Electrical Information Electrical RequirementsMD-120 Gas Maytag Co GAS Information Type of GAS Maytag Co 113395 Maytag Co Preparation for Operation Preoperational Test Basket Tumbler Coating Shutdown Instructions Operating InstructionsCompressed Air Pressure Air Supply Operating Steam Pressure Steam Damper System Compressed Air Pressure Air Supply Maytag Co 113395 SERVICE/PARTS Information ServiceParts Warranty Information Returning Warranty CardsWarranty Routine Maintenance CleaningSuggested Cleaning Schedule Steam Dryers Adjustments LubricationManual Reset Burner HI-LIMIT Instructions PhaseDual Timer Sectionviii Data Label InformationReversing Timer SPIN/DWELLADJUSTMENTS Timing LegendProcedure for Functional Check Replacement Components Maytag Co 113395 Installation Microprocessor Models onlyTypical Water Supply Optional Manual BypassFire Suppression System Theory of Operation System Reset Fire Suppression System DiagnosticsFire Suppression System Water Valve Check Fire Suppression System Diagnostics Messages 05/01/07

MDG-120PVV, MD-170PTVW specifications

American Dryer Corp has long been a trusted name in the laundry equipment industry, and their models MD-170PTVW and MDG-120PVV are no exception. These innovative machines reflect the company’s commitment to quality, performance, and efficiency.

The MD-170PTVW is a high-capacity tumble dryer designed for commercial use. One of its main features is its advanced microprocessor control system, which provides precise operation and programmability. This allows users to customize drying cycles based on specific fabric types and moisture levels, ensuring optimal results every time. The machine is equipped with a large, insulated cylinder that offers efficient heat retention, reducing energy consumption while accelerating drying times.

The MDG-120PVV, on the other hand, is a gas dryer that combines durability with sleek design. This model is particularly noted for its revolutionary airflow system, which maximizes hot air circulation inside the drum, optimizing drying efficiency. The stainless steel drum further enhances durability, providing long life and resistance to wear and tear. With a capacity of 120 pounds, it caters to high-demand environments seamlessly.

Both models showcase Advanced Technology Features such as a high-performance heating system that ensures quick heat-up times and consistent temperature maintenance throughout the drying cycle. This not only enhances drying efficiency but also helps maintain the integrity of fabrics, reducing the risk of damage from overheating.

Safety features are paramount in both dryers, with built-in lint filters and automatic shut-off protections designed to prevent overheating and reduce fire hazards. Energy-efficient designs in both models also cater to environmentally conscious operations, as they meet stringent energy consumption standards.

In conclusion, the MD-170PTVW and MDG-120PVV from American Dryer Corp are engineered to deliver high-performance and reliability in demanding commercial settings. With their array of features, advanced technologies, and robust construction, these machines stand out as ideal solutions for businesses looking to maximize productivity while minimizing operational costs. Whether for laundromats, hotels, or other commercial laundries, American Dryer Corp’s latest offerings continue to set the standard in the industry.
Top Page Image Contents