JVC KD-SV3104 manual Installation/Connection Manual, Parts list for installation and connection

Page 35

KD-SV3104

Installation/Connection Manual

GET0304-002A

0405DTSMDTJEIN

[UI]

EN

This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.

WARNINGS

DO NOT install any unit in locations where;

it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.

it may obstruct visibility.

DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident.

The driver must not watch the monitor while driving.

If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.

If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident.

If the parking brake is not engaged, “PARKING” flashes on the display, and no playback picture will be shown on the monitor.

This warning appears only when the parking brake wire is connected to the parking brake system built in the car.

Parts list for installation and connection

The following parts are provided for this unit.

After checking them, please set them correctly.

A / B

C

D

E

Hard case/Control panel

Sleeve

Trim plate

Power cord

F

G

H

I

Crimp connector

Washer (ø5)

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

J

K

L

M

Rubber cushion

Handles

Remote controller

Battery

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits.

• If you are not sure how to install this unit correctly, have it installed by a qualified technician.

Do the required electrical connections.

*1 When you stand the unit, be careful not to damage the fuse on the rear.

Bend the appropriate tabs to hold the sleeve firmly in place.

1

Image 35
Contents KD-SV3104 How to forcibly eject a disc How to reset your unitContents How to use the Mode button How to read this manualDisplay window Control panel KD-SV3104Parts identification Installing the lithium coin battery CR2025 Remote controller RM-RK120Main elements and features Getting started To drop the volume in a moment ATTTo activate the display demonstration Canceling the display DemonstrationsSetting the clock To tune in to a station manually Radio operationsStoring stations in memory When an FM stereo broadcast is hard to receiveManual presetting Listening to a preset stationMP3 and WMA discs playback/search order Disc operationsAbout MP3 and WMA discs To stop play and eject the disc Prohibiting disc ejectionTo stop play temporarily About the CD changer Playing a disc in the CD changerTo go to the next or previous tracks MP3 discs playback/search order in the CD changerTo fast-forward or reverse the track For MP3 discs For WMA discs To correct a mis-entry and to return to the previous menuWhile playing a disc MP3/WMA control screen OperationsTo select a track Text / , or aWhile playing an MP3 Or WMA disc To select a folderMode Mode Plays repeatedlySelecting the playback modes For Preset values Sound adjustmentsTo do Range Adjusting the soundBasic procedure General settings PSMIndications Selectable settings, reference Detaching the control panel Detaching the control panelPlaying an external component External component operationsMaintenance More about this unit Ejecting a disc General settings-PSMPlaying an MP3/WMA disc Changing the sourceSymptoms Causes Remedies TroubleshootingDisc playback MP3/WMA playback MP3/WMA playback CD changer Audio Amplifier Section SpecificationsHaving Trouble with operation? Refer to page of How to reset your unitParts list for installation and connection Installation/Connection ManualRemoving the unit When using the optional stayWhen installing the unit without using the sleeve Precautions on power supply and speaker connectionsTypical Connections Connecting the parking brake wireConnecting the crimp connector KV-MR9010 Connecting the monitorConnecting the external amplifier Connecting the external components